Gbody manual swap kit

Trader history for 84dragcutlass (0)

84dragcutlass

84dragcutlass

G-Body Guru
Aug 20, 2009
843
93
North Vernon IN
Pedals, z bar, grommets, pivot balls, linkage, switch. Everything needed to put a manual in a gbody besides the clutch fork. Bought years ago and haven't done the swap yet. Everything still in the packaging. $175. Pm if interested
20190814_201128.jpg
20190815_171135.jpg
 
  • Like
Reactions: Rktpwrd and MrSony
G

Gremlinsteve

Master Mechanic
Mar 6, 2018
254
63
I have a m21 muncie
What else besides this kit would I be missing to do the install
 
84dragcutlass

84dragcutlass

G-Body Guru
Aug 20, 2009
843
93
North Vernon IN
  • Like
Reactions: Rktpwrd
K

Kennybill

Greasemonkey
Mar 17, 2010
213
43
Braceville, Ohio
Gremlinsteve, what engine? You'll need either a Chevrolet or a BOP (Buick Olds Pontiac & Cadillac) bellhousing. G-body specific bellhousing.
 
G

Gremlinsteve

Master Mechanic
Mar 6, 2018
254
63
Chevy
I have a sbc bellhousing. M21 Muncie and a good clutch
I also have a fork
 
G

Gremlinsteve

Master Mechanic
Mar 6, 2018
254
63
Do our cars need a specific bellhousing?
 
pagrunt

pagrunt

Comic Book Super Hero
Sep 14, 2014
4,466
113
Elderton, Pa
Yes, the fork is also specific to our cars. Bellhousing 462606 for the 10.4" clutch/153 tooth flywheel, 464697 for the 11" clutch/168 tooth flywheel. Fork (discontinued by GM, made by in the aftermarker) is 14007356.
 
  • Like
Reactions: Rktpwrd
84dragcutlass

84dragcutlass

G-Body Guru
Aug 20, 2009
843
93
North Vernon IN
SOLD
 

Please support GBodyForum Sponsors

Classic Truck ConsolesDixie Restoration DepotMike's MontesP-S-TSouthside Machine PerformanceUMI Performance

contact[email protected]for info on becoming a sponsor