Guess my 1/4 mile time!!

[Ryebonti123]

Okay, shes almost ready for Oct 12. Headed to the track. Lets see what y'll think she'll run! 1986 buick regal limited. 383 stroker 450-500 hp. Holley 750 double. Elsasser built motor, turbo 400 trans with shift kit and 2300 rpm stall. Rear is a 373 limited slip. Currently running M and H drag radials. What do u think it'll run?
**Shes not a converted GN. Guy i bought her from had put the GN stickers on***

 

[bracketchev1221]

Holy crap! Elasser is still in business?? I used to work at McBetts Racing Engines.

 

[TURNA]

Holy crap! Elasser is still in business?? I used to work at McBetts Racing Engines.

I hope you're not they guy that pressed my valve guides in upside down!!!!!!!!!

 

[TURNA]

Okay, shes almost ready for Oct 12. Headed to the track. Lets see what y'll think she'll run! 1986 buick regal limited. 383 stroker 450-500 hp. Holley 750 double. Elsasser built motor, turbo 400 trans with shift kit and 2300 rpm stall. Rear is a 373 limited slip. Currently running M and H drag radials. What do u think it'll run?
**Shes not a converted GN. Guy i bought her from had put the GN stickers on***

Another NY guy??? What track are you going to?

 

[fleming442]

13.90

 

[455'ed80Regal]

I'm in line to agree with him ^^^ not knowing any specifics on the engine. Give or take a tenth or two.

 

[Clarmo]

Was it dynoed or 450-500 is just what the guys told you?
Those heads would need lots of work for those numbers.
Cam specs???
A 500hp small block is going to need more than a 2300 stall torque converter.
If you have 475hp and everything was perfect it would go bottom 11’s @120
I’m thinking you might go low 13’s...high 12’s if you’re lucky.
Not trying to be an *ss...been there, done that.

 

[lilbowtie]

The 350 in my Regal is putting down 450 HP and runs 11.20's - I'm inclined to go with Clarmo, those heads are small for a 383 unless a ton of work has been done to them or you built a low rpm torque monster.

 

[pontiacgp]

I hope you're not they guy that pressed my valve guides in upside down!!!!!!!!!

does that mean you had over head valves in a SBC?....

 

[axisg]

13.6