hazard lights relay plug

[86_olds]

were is at on 86 cutlass cant find mine i know is on the right side close to the gas pedal some where but i cant find i remove the relay along time ago cuz it didnt work now trying to replace it and i cant find the plugany on know were it at

 

[Doober]

Far as I've ever known, hazards are controlled by the switch on the column just below the ignition cylinder, and the flasher is under the dash, almost directly above the emergency brake release handle, alongside the horn relay, and seat belt buzzer.

 

[86_olds]

damm i dont even have a seat belt buzzer or door buzzer

 

[Doober]

I don't think you'll have a door buzzer, I'm not sure any G-Bodies have come with a door reminder (have yet to get a solid answer on that). The seat belt buzzer has a chance of not working because it needs a ground through the driver's seat belt buckle (there's a little wire that connects to it at the factory).

 

[86_olds]

oo ok and i think i might have an idea were that harness its at i remeber i pulled the carpet back a bit cua i was messing with some rca's and power cables under the carpet

 

[Doober]

Basically just follow the inside of the dash as best you can around to where the handle is for the parking brake release, you should see the wiring right there.

 

[RegalBegal]

I don't think you'll have a door buzzer, I'm not sure any G-Bodies have come with a door reminder (have yet to get a solid answer on that)..

Got a rather ANNOYING buzzer in mt Regal.

 

[Doober]

Same here I'm wondering if the later cars ('87, '88 Monte, etc.) actually had a key minder connection for the ignition cylinder (dings, etc. if the key is left in with the door open), and if it is what all would be needed to make it work in a G-Body that originally just had the seat belt buzzer.