Looking for Electrical Connector for 3 Prong Choke Oil Pressure Sending Unit

[xcookpac]

Hi all:

Looking for a source, or part number, for a three ("3") prong electrical connector for the three ("3") prong oil sender. Any assistance would be greatly appreciated.

My 85 EC came with a two prong switch and connector. I will be using Standard PS-127 (a three prong switch) that will allow me to run an idiot light for oil pressure from the choke oil presure switch (normally, or stock, it is two prong). See pic of three prong oil sender.

 

[fleming442]

I just threw "pigtail" behind the part number in a Google search....maybe?
https://www.amazon.com/dp/B000EQR8JG/?tag=gbody-20

 

[xcookpac]

gtail" behind the part number in a Google search....maybe?

Good thinking!!!! Yes that is what I am looking for. That is what I love about this forum: so much knowledge and friendly too.

 

[pontiacgp]

That is what I love about this forum: so much knowledge and friendly too.

you say that now but wait till you get his bill for consultation....

 

[xcookpac]

you say that now but wait till you get his bill for consultation....

Please send the bill to me at the following address:

Mr xcookpac
84 Rainey Street
Arlen, Texas 78104

or you can send it to my buddy at the following address:

Mr. Jeffrey Boomhauer
73 Rainey Street
Arlen, Texas 78104

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

 

[WanaBa442]

Just use a headlamp connector

Like $3.00 at NAPA......
That's what I used when I used the above sending unit to run the dummy light and an electric choke.