Monte SS passenger side bucket seat tracks

[liquidh8]

Okay guys, I have Monte SS bucket seats in my wagon. My question is, is why the passenger side bucket seat track holes reversed?

For the life of me I never remember it being like that.

 

[TURNA]

tracks on backwards?

 

[liquidh8]

I thought about that, it's not really possible thought so the track won't slide if it's on backwards or the wrong side.

Sent from my Z981 using Tapatalk

 

[Injectedcutty]

Jim, i wish i could be more help man! I have monte tracks on my aftermarket buckets, but the seats are stashed away at my brother n laws house. It would be this weekend before i can get out there and look at em for ya.

Hopefully one of the monte guys can chime in!

Maybe change the thread title to show Monte seat tracks....

 

[liquidh8]

No worries, I changed the title to the thread to see if it gets more interest.

 

[Longroof79]

Hope this helps you, Jim.

 

[liquidh8]

Jack, thank you. It appears that bucket seats don't use every stud and every hole on a tracks in the floor braces.

Sent from my Z981 using Tapatalk

 

[Longroof79]

That's true, Jim.
Except the rear mounts of the tracks utilize both studs...at least on one side if I recall.
The flat plastic cover is on the front track.

 

[Injectedcutty]

That's true, Jim.
Except the rear mounts of the tracks utilize both studs...at least on one side if I recall.
The flat plastic cover is on the front track.

If i remember correctly, i think they use 5 studs per side. One on each side of front, one stud on rear(don't remember which side), then 2 studs on the remaining mount.

I do remember getting 10 flange nuts when i was mocking mine up.

 

[liquidh8]

Thanks guys. I do have the plastic covers for the tracks, I just have to dig them out.

Sent from my Z981 using Tapatalk