RACING Need recommendations on pricing for Drag Malibu.

Status
Not open for further replies.

Livewild

Not-quite-so-new-guy
Mar 24, 2021
26
10
3
Miami Fl
It’s my first race project I’ve decided to sell. And I have no real idea on what a car like this would sell for. Any recommendations for a fair price range and thoughts on the car would be great. Everything within two years old, tires have about 15 passes recipes for everything Thanks! Located in south Fl


1980 Malibu

180gph fuel pump,
140 gosh stand-alone no’s pump
Fram external fuel filter
8an fuel lines
An, push to lock lines
Holley non-bypass regulator
Holley non bypass regulator (nitrous)
G- Radiator/fan
External water pump meziere
Rhodes racing 3 gal fuel cell
Line-lock
G body manual brakes kit
Disk,disk proportional valve
Moroso brake adjuster
Auto meter gauges
(Monster tac, volts, oil psi)
B&M bandit ratchet
Kirkey sm seat
kirkey seat brackets
G-force 3in 5 inch harness (latch style)
Xpower16volt D1600 battery
Xpower1514 16 volt charger
Battery box( sealed)
External deral trans cooler,fan



Ignition

Msd Digital 6
Msd distributor
Blaster 2 coil
msd plug wires
Painless performance 8 switch panel
Nitrous express wet kit
Nos wot/window switch
Push to disconnect battery switch





Suspension/body

No rust
2k primer
Summit Mat black paint to protect body
12 point cage
Fiberglass bumper glasstek
Lift off fiberglass hood glasstex
Hoodpins
New door seals
New trunk seals
Ac block off plate
New brake calipers( front / rear )
New brake lines (front)
S10 lowering spindles
Braced and boxed frame(rear)
Rear lowering springs
Brp non adjustable lower(adjustable upper) 4 link
Arp 3 inch studs rear 7/16
Driveshaft loop
Mini tube
Boxed frame
Notched frame
Braided brake lines (rear)
Quick performance 9inch
Carrier 3.73
Moser axles
Arp 3 inch 1/2

2800 lbs
29 10.5 17 plenty of room for bigger tire.
Wheels crager soft 8’s





Engine/trans
Atm innovation 750 e85 carb
2 inch spacer
Hurricane high rise intake
Iron eagle 210cc heads
MLS head gaskets
Arp head studs
Scat h beam rods
kB pistons ( .20 over)
Scat sfi flex plate
Speed master rod bolts
ARP main cap bolts
Scat crank 9000 crank
Speed master roller rockers .60
Speed master pushrods
Howard lifters
Dart rocker retainers
Lunati stud girdle
Prw rocker arm studs
Cam ( no idea)
Hooker super comp long tube headers
Header wrap
Spark plug socks
Felpro gaskets
Trans th350
5000 stall 10 inch
Shift kit
Full manual body

3084F362-270C-4754-BE32-7E6D7F75C892.jpeg
690C1478-9AB9-479F-9339-806562977938.jpeg 720F1D03-E07A-4F4F-A130-B42FAF9EA665.jpeg 08857FEA-63E8-48D0-82B9-EFF41195C603.jpeg 78943E66-1415-4418-8050-4CBB8447ECFB.jpeg 3B579A09-4F75-495C-9F4B-0E2AAEC8DB77.jpeg B1D1B3E0-F9C3-423B-B17C-85FA59C1F568.jpeg 23AC7CA9-D135-410D-B3A2-D7CBEEF84846.jpeg 28B57661-0103-4306-A917-34FDD1A6491A.jpeg
 

Livewild

Not-quite-so-new-guy
Mar 24, 2021
26
10
3
Miami Fl
Alot of work done man. What kinda ET's so far?
I haven’t been to a prepped track. The closest one is 4 hours away. But on a dragy not spraying just motor. I’ve been 7.30’s at 93 1.61 60ft. Water burnout, concrete surface. I’m still new to racing, consistency is my problem.
 
  • Like
Reactions: 1 user

abbey castro

Royal Smart Person
Oct 31, 2015
1,042
1,303
113
Harker Hts TX
The list of parts is impressive. The car just doesn't look appealing. Soory but I have no idea what it would be worth. Look online for race cars and find a Malibu that is close to yours to get an idea. Good Luck!
 
  • Like
Reactions: 1 users

Injectedcutty

G body LS mafia
Nov 24, 2014
6,057
22,807
113
Louisville, KY
With all the stuff listed, I'd think $8k would be fair to ask. Someone might give ya $10K, just all depends on if it checks the boxes for somebody.
 
  • Like
Reactions: 1 users

Livewild

Not-quite-so-new-guy
Mar 24, 2021
26
10
3
Miami Fl
I’ve been told around 10k would be a reasonable number by a few people. Like I said earlier im not familiar at all with this market. I’ll probably be posting it up for sale soon. Thanks for the help everyone
 

565bbchevy

Geezer
Aug 8, 2011
9,591
12,612
113
Michigan
I think $10 000 is a fair price to ask, how tall a driver is that set up for?
When it does come time to sell besides the usual FB and CL etc. consider classified adds for local tracks if they offer it.
 
  • Like
Reactions: 1 user

ck80

Moderator
Moderator
Supporting Member
Feb 18, 2014
5,742
9,114
113
Take a look on racingjunk as well, see what similar stuff is getting put out there for.
 
  • Agree
  • Like
Reactions: 1 users

Livewild

Not-quite-so-new-guy
Mar 24, 2021
26
10
3
Miami Fl
I think $10 000 is a fair price to ask, how tall a driver is that set up for?
When it does come time to sell besides the usual FB and CL etc. consider classified adds for local tracks if they offer it.
I’m 6ft. I can say that seating bracket/setup I am disappointed in myself for. Thinking about doing it over if I keep the car.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor