New guy 87 cutlass supreme

[Rican87]

Wassup guys I happened upon this forum while looking for parts. Looks like a great site with some bad *ss cars and helpful people. After reading a few posts I decided to join. Hopefully you guys can shed some light on my problems. I've got an 87 cutlass supreme that I've had since I was sixteen. When I got her she was all original with 73000 on her. Of course like most young people I tore it up not knowing what I had. Fast forward 8 years and I'm finally trying to undo all the b.s..

 

[Jeff L]

Welcome to the forum from AZ. You picked the right place to help you get your car fixed up.

 

[84slow]

Looks decent lots of bone left. Welcome from Canada ontario

 

[Rican87]

Appreciate it from MO fellas. I'm pulling carpet as I type and it's a lot worse than it looks. Floor pan look shot.

 

[Injectedcutty]

Welcome aboard from KY. As the others said, you've joined the best forum on the web....tons of knowledge, great guys, and some badass rides!!!

It's good to see you've kept her all these years. My 87 supreme was my 1st car that i bought at 17 years old, I've had it almost 16 years now!

 

[Clutch]

Greetings from dirty Jersey. It's only metal no matter what your plans are there's people on this site that can help it's really good like that. Welcome

 

[Rican87]

Well guys it's pretty bad. How hard is it to do a floor replacement?

 

[Andebe]

Welcome from Indiana. Thats a lot of cancer to deal with. If it were me,and within my budget,I would keep that Cutlass for a parts car and look for a project with better bones. Not hating,just educating...

 

[Clutch]

View attachment 66799 Well guys it's pretty bad. How hard is it to do a floor replacement?

I've done worse but I'm a body man if you're going to do it get new floors before you cut the car or you'll end up with a mess. When your ready to do it just ask and I'll walk you through it if necessary. Like I said it's only metal hope you have a mig welder

 

[Rican87]

Welcome from Indiana. Thats a lot of cancer to deal with. If it were me,and within my budget,I would keep that Cutlass for a parts car and look for a project with better bones. Not hating,just educating...

Believe me I thought about. I'm eager to learn so I think I'm going to try and tackle it. Indiana's my home state. I've got a Monte down there, and come race the dirttracks from time to time.