No spark questions, and have questions

Status
Not open for further replies.

Tofast4U

Not-quite-so-new-guy
Jan 8, 2019
35
2
8
I replaced my Cap and Rotor an Now have No spark. So after troubleshooting tonight I still have no spark and more questions.

I have power at the coil, I have power coming out of Coil.
No spark coming out of coil
No voltage at the Pickup coil. (Should I have Voltage at the Pickup coil????) I have 0 on volt meter. I would think you should get some readings.
Checked my fuses they are good.
checked my connections.
Electronic module had some corrosion on the pins, cleaned them up.

Any other idea's?
 

DRIVEN

Geezer
Apr 25, 2009
8,074
14,533
113
*CENSORED*
Did you remember to swap the ground strap?
20190410_052131.jpg
 

TURNA

Rocket Powered Basset Hound
Jul 24, 2009
10,941
19,992
113
Socialist NY
Like DRIVEN said plus the little springy thing in the center of the cap

If everything is there put the old one back on see if it starts
 

Tofast4U

Not-quite-so-new-guy
Jan 8, 2019
35
2
8
87 monte SS with vortec 350. Where is that ground strap located? still using Stock ecm and the electrical.
 

DRIVEN

Geezer
Apr 25, 2009
8,074
14,533
113
*CENSORED*
Sandwiched between the coil and cap. Often gets overlooked when replacing cap and rotor. New caps don't have them installed so you have to pull it from the old one and swap it over.
 
  • Useful
Reactions: 1 user

84GP455

G-Body Guru
Jun 19, 2007
779
96
28
Methuen Ma.
Could be the HEI control module, I had them crap out on me many times they can be finicky and can quit without a notice, so I always keep a spare one on hand. If you are getting no spark but its turning over, I would try replacing the module and don't forget the thermal paste on the base of it or it will over heat and won't last long.
mudule.jpg
 
Last edited:

Gonzo1970

G-Body Guru
Sep 30, 2018
898
1,302
93
Sandwiched between the coil and cap. Often gets overlooked when replacing cap and rotor. New caps don't have them installed so you have to pull it from the old one and swap it over.

If he had to ask where it was, I'm betting he didn't swap it. I think you nailed it.

-Gonz
 
  • Agree
Reactions: 1 user

Tofast4U

Not-quite-so-new-guy
Jan 8, 2019
35
2
8
My Rotor didn't have that part... Had Bad pickup coil on the distributor. Replaced with all new and runs better then ever... Thanks for the replies.
 
  • Like
Reactions: 1 users
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor