removing stock radio

[ADentice]

Can someone give me an idea of how to get this damn radio out. I took the the front panel off and removed the 4 screws but it doesnt just come out. Is there more hidden screws somewhere? I didnt want to wrench on it too much so i didnt ruin anything inside

 

[truracer20]

There should be a screw or nut on the back.

 

[truracer20]

It's been a while since I took one out but there will be a bracket that attaches to the back or side of the radio and goes to a dash support,

 

[ADentice]

do i have to take the whole dash apart to get to it?

 

[truracer20]

You can get to it from the underside.

 

[jmt455]

I find it easiest to get at the rear attachment through the glove box opening.
Drop the door down past the travel stop and you can easily reach the rear of the radio to disconnect the antenna lead and the rear mounting nut.
Then slide the radio rearward to get access to the wire harness connectors.

 

[ADentice]

Ok, cool thanks