Replaced the Filler Wire Holder on my Vulcan Welding Cabinet

RecklessRegal

Apprentice
Feb 17, 2019
82
350
53
I've had this Vulcan welding cabinet for a few years now, and while I like it, it has some down falls. One of my major complaints is storage of filler wire. The holder that they included is designed to hold full length wire in the non-resealable container that it comes in if you pick it up at the weld supply store AND it only holds 4 different tubes.

Not only do I use way more than 4 types of filler wire, but I wanted something that was resealable AND would hold half length filler (my filler ships half length anyhow) to get it out of the way.

I decided to grab some PVC and sheetmetal and see what I could come up with. It doesn't have to be rigid so I didn't go wild reinforcing it. Let me know what you think.

PXL_20210703_031422848.jpg


PXL_20210703_182222962.jpg


PXL_20210703_182742470.jpg





PXL_20210703_195619831.jpg

PXL_20210703_200355023.jpg

PXL_20210703_205422121.jpg

PXL_20210703_210546944.jpg

PXL_20210703_220659734.jpg

PXL_20210703_235010309.jpg

PXL_20210703_024851286.jpg

PXL_20210704_183316377.jpg

PXL_20210704_214807097.jpg





PXL_20210705_190252271.jpg

PXL_20210705_001802045.jpg
 
  • Like
Reactions: 8 users

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan
This cool and all, but maybe cross link it here for posterity:

 
  • Like
Reactions: 1 user

Northernregal

Sloppy McRodbender
Oct 24, 2017
3,359
12,826
113
Red Deer, Northern Montana territory
I've had this Vulcan welding cabinet for a few years now, and while I like it, it has some down falls. One of my major complaints is storage of filler wire. The holder that they included is designed to hold full length wire in the non-resealable container that it comes in if you pick it up at the weld supply store AND it only holds 4 different tubes.

Not only do I use way more than 4 types of filler wire, but I wanted something that was resealable AND would hold half length filler (my filler ships half length anyhow) to get it out of the way.

I decided to grab some PVC and sheetmetal and see what I could come up with. It doesn't have to be rigid so I didn't go wild reinforcing it. Let me know what you think.

PXL_20210703_031422848.jpg


PXL_20210703_182222962.jpg


PXL_20210703_182742470.jpg





PXL_20210703_195619831.jpg

PXL_20210703_200355023.jpg

PXL_20210703_205422121.jpg

PXL_20210703_210546944.jpg

PXL_20210703_220659734.jpg

PXL_20210703_235010309.jpg

PXL_20210703_024851286.jpg

PXL_20210704_183316377.jpg

PXL_20210704_214807097.jpg





PXL_20210705_190252271.jpg

PXL_20210705_001802045.jpg

Best Gif Reaction GIF

I like that cart a lot! I have some Ideas!
 
  • Like
Reactions: 1 user

liquidh8

Comic Book Super Hero
Ive been wanting to get that cart for a while, to replace the 3 I am running.
 

81cutlass

Comic Book Super Hero
Feb 16, 2009
4,639
13,542
113
Western MN
That tops the 'fancy' department :)
 

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor