Finally getting around to this swap. Picked up some loaded S10 lower control arms to swap onto the Monte. I have searched and read through previous posts but cannot get a definite answer. I need to know what size bolts are needed to mount these to the G body frame. I have read 1/2" bolts but cannot find an actual confirmation nor complete bolt size (diameter, length, etc). I'd like to know the exact size so I can just walk into the hardware store and get exactly what I am needing. I saw that UMI sells an S10 bolt set (PN:3802) but cannot find the dimensions for those bolts on any site that lists them.
Thanks in advanced.
Thanks in advanced.