Save it or scrap it?

[565bbchevy]

Well at least I can see metal this time around.

 

[DysonSS]

I figured I update. I started a build thread on the car a while back. I notched and braced the rear frame rails I also boxed in the side rails and por-15 the frame. I replaced the body mount supports that we’re bad on the new body. I also replaced the rear floors. I used summit brand poly body bushings with new bolts. I installed a allstar racing 10 point roll cage and a poly seat. I put a 15 gallon fuel cell in the trunk and ran 8an nylon braided fuel line up to the HV mechanical pump. I still have plenty of work to do but I’m happy I was able to save some of the original car, plus have the spare parts helped a lot as well. I just got the nose on today. It feels so good to not be defeated!!!