SBC Swap

[1fast87olds]

today i got a 350 4bolt im goin to put in my 87 cutlass now but i kinda wanted to keep it oldsmobile.. but i got a heck of a deal on this sbc so im goin with the chevy ..
75' 4 bolt 350 $200
.30 over Speed pro pistons 10.1
lunati bracketmaster ll 292* 480lift
1.6 roller rockers ( still have to buy )
Weiand X celarator intake
Crane double roller chain
accel HEI distb...... holley 650
78' th350 w/ 2400 stalll B&M shift kit 3.42 gear

 

[86Cutlass350]

today i got a 350 4bolt im goin to put in my 87 cutlass now but i kinda wanted to keep it oldsmobile.. but i got a heck of a deal on this sbc so im goin with the chevy ..
75' 4 bolt 350 $200
.30 over Speed pro pistons 10.1
lunati bracketmaster ll 292* 480lift
1.6 roller rockers ( still have to buy )
Weiand X celarator intake
Crane double roller chain
accel HEI distb...... holley 650
78' th350 w/ 2400 stalll B&M shift kit 3.42 gear

What heads do you have for it?

If you don't have any or have stock heads, you need to spend the money you saved investing in a good set...it will make all the difference in the world.

 

[1fast87olds]

stock 194s ...w/ some porting, and add valve springs w/ screw in studs.... and set of dynomax long tubes

 

[383Camino]

That oughtta make your hair stand up a little bit.

I have stock iron ported heads with 1.94s too...they seem to work real well. Good luck!!

 

[skoolieb]

nice deal !!!

 

[86Cutlass350]

stock 194s ...w/ some porting, and add valve springs w/ screw in studs.... and set of dynomax long tubes

If you didn't have the intake already, I'd recommend some Pro-Topline Vortecs...Only $500 for a set, really good flow numbers for stock GM heads.

 

[1fast87olds]

yeah, for now i will use these heads but later on down the road id probably go with either Edelbrock e-tec 200s or World product sportsman II ...

 

[1fast87olds]

well i got me a set of ARP rod bolts ... with all this so pretty soon it will all be put together an going in the ole Olds

 

[1fast87olds]

Update...........
I orig was goin to put a 355 in my cutlass BUT due to the fact i lost my job had to get rid of 2900 bucks worth of brand new stuff sell for 1000 bucks........ list included
Eagle crank, Ealge h beam rods speed pro pistons, roller rocker , fully ported polished 194 heads 480lift cam, new intake , carb everything i had was newstill in the box.... so i ended up puttin the olds motor in it
i didnt want to get rid of it but it happens
again i will have Updated pics