MONTE CARLO Talk Valve Covers And S-10 P/S bracket problem

[Bullett801]

in that last picture it looks close to the intake,it could be just the angle though if it wasn't stopped by the cover would it clear the intake?

It will be close, I will have to dbl check that as-well! Good eye! I might have missed that. I appreciate the feedback!

 

[oldsmobile joe]

True, but I’m not using A/C on this particular build.

oh, then who cares. cut away

 

[melloelky]

oh, then who cares. cut away

I think it doubles as the p/s pump mount as well and that's another problem

 

[oldsmobile joe]

I think it doubles as the p/s pump mount as well and that's another problem

oh, i know. but unless your need the a/c mount for a compressor delete pulley, you can cut the top 1/4 off and never miss it.

 

[Bullett801]

I do need the ac delete pulley to make it work, so I just trimmed enough off the back compressor mounting bolt hole to make it fit. It may not look as fancy as some of the other options or kits, but it was a free pulley system, and there’s always upgrading time in the future!!! Here’s some pics to put a visual to it! As always, thanks for the input everyone! I greatly appreciate the advice, knowledge and opinions!! Til next time fellas!!!

 

[JAMCAR223]

OK... you have my blessing