So I've been stuck in ordering twilight zone. I have a Lee 670 steering box I'm ready to p put in. I ordered earls metric o ring to -an conversion fittings. The problem is that the conversion fittings are shorter from the flange to the o ring seat than the factory gm fittings are. This doesn't make sense to me. It's there a specific conversion fitting that I need? Am I missing something?
trouble with power steering fittings
- Thread starter 81cuttonroids
- Start date
- Status
We've run into that as well.
Turn One Steering has the correct "longer" adapters. I haven't had much luck sourcing them from Aeroquip, Earl's and so on. I'm sure those companies have them but it seems like the short adapters are more prevalent.
I don't know if I can post a non-sponsor link so just Google Turn One Steering.
ramey
Turn One Steering has the correct "longer" adapters. I haven't had much luck sourcing them from Aeroquip, Earl's and so on. I'm sure those companies have them but it seems like the short adapters are more prevalent.
I don't know if I can post a non-sponsor link so just Google Turn One Steering.
ramey
- Status
Similar threads
