Trying to clean and rustproof the in side my doors!!!!(help)

[G-BUDDY]

OK i pulled the doorpanels off my 86 cutlass to rebuild my window motors.In the process i found leaves,sticks and what ever else could fall in the door because of no window seals.Tried to clean most of it out but wasn't very easy. :x how could i clean out the doors?and how could i get a nice coat of por-15( rust paint)in my door to save them from rusting out???? :?

 

[Coveted]

find the drain holes and clean them, then you can wash the inside out with soap and water, make sure it dosent leave a residue. clean the drains really well, por 15, then undercoat over it. after the por 15, make sure u keep the drains open when you undercoat.

 

[G-BUDDY]

THANKS SOUNDS SIMPLE!!now if i can just fit my arm inside the door to paint it!! :x :x

 

[Coveted]

THANKS SOUNDS SIMPLE!!now if i can just fit my arm inside the door to paint it!! :x :x

really long paint brush haha. also replace those outter window sweeps to keep future much from building up as fast.

 

[G-BUDDY]

THANKS SOUNDS SIMPLE!!now if i can just fit my arm inside the door to paint it!! :x :x

really long paint brush haha. also replace those outter window sweeps to keep future much from building up as fast.

ya in pretty good at rigging up some stuff .i will figure something out