What did you do to your non-G body project today? [2020]

[airboatgreg]

Worked on the boat. The floor is diamond plate also

 

[B's 87mcss]

Getting ansy waiting for Monte to get back from paint, had to do something in the meantime, decided to make a bit of wall art from an old building sign. Narrowed it up from 13' wide to about 8' wide, filled in a few spots with some filler and paint, a bit of angle iron, wiring, etc. Convinced the wife to hold and balance the sign while performing the step ladder ballet 16 ' up the wall. Now if someone looks in the window late at

night, something will be looking back!!

 

[81cutlass]

Channeled my inner Paul Bunyan yesterday.

Cedar tree is old and one branch fell down last winter. The chainsaw needed some calibration from when I reassembled the carb last week so after that I was able to start choppin'

The main branch had ants living in it and was hollow and split so it was time to take the ole cedar bush down. And it was titled pretty bad,

One down

Done

Off to the lawn dump

 

[Tomeal]

Getting ansy waiting for Monte to get back from paint, had to do something in the meantime, decided to make a bit of wall art from an old building sign. Narrowed it up from 13' wide to about 8' wide, filled in a few spots with some filler and paint, a bit of angle iron, wiring, etc. Convinced the wife to hold and balance the sign while performing the step ladder ballet 16 ' up the wall. Now if someone looks in the window late at View attachment 142922 night, something will be looking back!!

Hook a motion detector to the eyes so it turns on/off with movement. It'll look like it's blinking at night!

 

[Supercharged111]

I did yard work most of the day. Filled in ruts from the contractors last fall. Took out an old side walk with the skid loader and back filled with dirt. Later I changed out my broken anti roll bar on my Regal. View attachment 142837 The original one is hollow and was not attached to either side of the car. The new one is a ZZP solid bar. 80 bucks and came with all hardware.

I had a 98 Grand Prix GTP that was a rust free car here in CO. My front sway looked about like yours when I got the car though, it came out in 3 pieces. I found a clean, solid Dorman bar in the junkyard for cheap and I have to wonder if ZZP is rebadging them. Made the car understeer more, but cornered flatter.

 

[1320John$$$]

Pulled the C6 out of the F150 today
Note to Henry Ford thanks for making these things so goddamn heavy

 

[TURNA]

Channeled my inner Paul Bunyan yesterday.

Cedar tree is old and one branch fell down last winter. The chainsaw needed some calibration from when I reassembled the carb last week so after that I was able to start choppin'

The main branch had ants living in it and was hollow and split so it was time to take the ole cedar bush down. And it was titled pretty bad,

One down
View attachment 142935

Done
View attachment 142936

Off to the lawn dump
View attachment 142937

Sweet trailer wheels!!

 

[airboatgreg]

Channeled my inner Paul Bunyan yesterday.

Cedar tree is old and one branch fell down last winter. The chainsaw needed some calibration from when I reassembled the carb last week so after that I was able to start choppin'

The main branch had ants living in it and was hollow and split so it was time to take the ole cedar bush down. And it was titled pretty bad,

One down
View attachment 142935

Done
View attachment 142936

Off to the lawn dump
View attachment 142937

May it rest in pieces and smell well with the force

 

[airboatgreg]

Action shot!

View attachment 142841

I've been a charcoal guy for years. This is my first pellet grill and I am really liking it.

We smoked venison link sausage, ribs and yard bird quarters last weekend
I love the taste and smell of known carcinogens in the afternoon with a cold beer

 

[RabbitHoleSS]

Not a vehicle hobby but hobby nonetheless. Bluegill and morels from yesterday. Social distancing on the lake and in the woods.