What did you do to your non-G body project today? [2019]

Status
Not open for further replies.

motorheadmike

Geezer
Nov 18, 2009
8,976
27,522
113
Saskatchewan, Truckistan
15F or 15C? But I thought you Canadians live for the cold.

15*C is t-shirt weather. It is -26*C here now... and I was really grateful for my heated garage where I changed the oil in my TBSS and its Procharger, and a rear plate lamp.
 
  • Like
Reactions: 2 users

fleming442

Captain Tenneal
Dec 26, 2013
13,046
24,214
113
I switched the apline head unit along with the bluetooth mic, the XM attena and wiring for my dash cam from my old Jeep to my "new" Jeep. Did that outside in 15 degree weather so it was a bit cool but got the job done...:)

Is the heat broke in them?

That's one hulluva nice job, Joe!!!!
 
  • Like
Reactions: 1 users

fleming442

Captain Tenneal
Dec 26, 2013
13,046
24,214
113
I got my snowblower running; that was no small feat. It was almost empty in the tank, and I didn't run the carb dry last time I used it, so yeah, instead of dumping all the stale fuel, I dumped in some fresh gas and expected it to run. Because I"M SMART! :blam: That led to a carb cleaning and, even then, I could barely keep it running. If we get enough white sh*t tonight, I should be able to burn that crap out and get fresh cat piss in there.
Also, straightened up the driveway millings a bit, and brought in a load of firewood. Cooking a brisket on the woodstove all day tomorrow. nom, nom, nom, nom
 
  • Like
Reactions: 5 users

Turbolq4

Royal Smart Person
Sep 25, 2017
1,732
4,207
113
Nampa Idaho
IMG_20190111_112348889.jpg
IMG_20190111_111527763.jpg
IMG_20190111_121154951.jpg
IMG_20190111_140914366_HDR.jpg
IMG_20190107_191355723.jpg


A little concrete, wood for walls and floor showed up, and in my spare time I decided to become a small engine goon and picked up some side work for the concrete guys.
 
  • Like
  • Winner
Reactions: 8 users

dirtywhiteboy

Master Mechanic
Jan 6, 2009
299
152
43
Mount Solon, VA
I missed out on a low mile L77/4l80 this week because I have so much crap already. I NEED a new shop too!
My wagon doesn't live at my house because I can't get it inside.

Sooooo I have decided to hold off on my LS swap until I can clear this out of the way.
She has been taking up shop space far too long. I was building a Desoto 291 Hemi,
but hard to find/expensive parts have the baby elephant on the shelf in lieu of this 1964 Nailhead/st400 combo.

started assembling the gauge cluster today

IMAG5257s.jpg
IMAG5701s.jpg
IMAG5703s.jpg
 
  • Like
  • Winner
Reactions: 7 users

81cutlass

Comic Book Super Hero
Feb 16, 2009
4,639
13,542
113
Western MN
Fiance wants a card holder made out of a log to hold cards for the reception. Found a hollow log but it wasn't big enough to hold anything so I used a buddies band saw.

1547436207951.png

1547436218034.png


And my friend and I that co own some machine shop equipment is moving and sold his CNC bridgeport to buy a manual one and we traded our co-owned tool and cutter grinder that we used twice in two years for a nice late 60's early 70's do-all 18" or so steel bandsaw.

Loaded the old grinder today, it weighed 2200ish lbs.
1547436348341.png

1547436363352.png

1547436374331.png
 
  • Like
  • Creative
Reactions: 6 users

ItsnotaGN

G-Body Guru
May 28, 2016
662
1,142
93
Colorado
I haven't run the Kodiak since we moved here in Sept '17. I did add Stabil and shut the carb off and run it out of fuel. Amazingly, I turned on the fuel, hit the starter and off we went. Had about 10" of snow, hooked up the plow under the guise of clearing snow (more like I wanted to ride it around town.) If you ride your quad around town on the street, you're an *******. If you ride your quad around town with a plow on the front, you're an OK kinda guy. Plowed out the single mom's driveway across the street and some of the older neighbors. It's good public relations since I'm probably the noisiest SOB on the block. Plus I get to do stupid sh*t like climbing the plow pile on the cul de sac down the block. Good times.
IMG_0483.JPG
 
  • Like
  • Haha
Reactions: 6 users
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor