What kind of screws for corner lights 84-87

[shawn1112]

Did the 84-87 header swap on my 83 Regal. Bought new aftermarket headlight bezels and corner lights. I was able to source new hardware for bezels but not the corner lights. They appear to screw in to plastic housings on the bezel. But not sure what type or size of screws to use? Don’t want to screw up brand new bezels with incorrect hardware.
Thanks in advance.

 

[69hurstolds]

Assuming the diagram below is what you are needing (corner lamp #13)

M4.2-1.41 x 25mm (#10 in diagram)

GM p/n 11505182 (discontinued, of course)

Clips and Fasteners will sell you a box of 50 for 11.99 plus shipping.

https://www.clipsandfasteners.com/Ss-Torx-Oval-Head-Tap-Screw-M4-2-1-41-X-25mm-p/a14053.htm

Also it MAY call out for M4.2-1.41 x 30 mm as well (#15 in diagram) GM p/n 11504656. Same screw as above, but 5mm longer for whatever reason.

 

[RegalBegal]

Here ya go black or stainless depending on your bezels

BLACK

http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=121622972966

STAINLESS

http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=121834856939

 

[Injectedcutty]

You can also find them screws at Lowe's in the hardware section(look for the automotive slide out drawers). Also, most Do-it-best hardware stores have them in stock as well.

 

[shawn1112]

Thanks everyone!!!