Wanting to do lowering springs on my Cutlass. Ramey at UMI suggests the 3051 2" lowering springs if I want to do all the way around, but my concern is the "flat" wheel well on the Cutlass compared to the Monte. The Green Machine pic he sent me looks badass, but if the FRONT tires rub every time I twist or turn that would be just bad. My FRONT wheel well height at the front is 11 1/2", Rear is 9 1/2", and at wheel centerline is 26 1/4". wondering if someone could give me comparative measurements on a 78-80 Monte please?