Hey fellow gbody lovers! I’m a new member to this forum although I’ve been following silently since I purchased my first gbody when I was 17 “ten years ago “ . Couple years ago when I was stationed in Jacksonville I came across a roller 1982 Monte Carlo cl that I’ve been putting together ..
The doors were completely rusted at the bottom and I recently acquired two rust free doors from an 87 mc. My 82 doors have power windows and my 87 doors are Manual. Now how do I remove each of the regulators from the different doors? I seen a write up on how to remove the motor from the power doors but can seem to locate anything bout regulator removal
Thank you !
GO Navy!
The doors were completely rusted at the bottom and I recently acquired two rust free doors from an 87 mc. My 82 doors have power windows and my 87 doors are Manual. Now how do I remove each of the regulators from the different doors? I seen a write up on how to remove the motor from the power doors but can seem to locate anything bout regulator removal
Thank you !
GO Navy!