Recent content by 98whitez24

Well, its been 3 years since I last posted this, life got in the way and I ended up parting it out and built a lifted jimmy, sold that and looking at 4 or 5 different cutlasses, gonna pick one up soon hopefully and redo what I did to this one. There isn't a day I don't regret sending off the...

hey guys, im trying to remove the front clip, wanted to remove the inner fenders, then the outer skin, i have what looks like all the bolts out for the plastic inner, but still wont come out, and for the outer skin, it seems like its held on under the fender infront of the door? any thoughts...

pulled my steering column and marked all of my wires on the harness, next is most likely pull my pedals, then drivers side is stripped, then figure out how to pull the ac box, do i have to pull the fender to do it?

not today but yesterday, pulled all my engine bay wiring, and unhooked the fusebox, just need to pull the column and pull the intt harness, gonna try to have front clip off by friday if time allows

i intend on runing the 5.3 i believe lm7? may be wrong, backed by the 5 speed from an s10 with the 4.3, stage 3 clutch, gonna try to utilise the s10 brake/clutch pedal along with the master and slave cylinder, also gonna be doing the blazer front brake mod, and fbody rear disc seap i believe...

hey guys, looking to do the 5.3l chevy truck swap into my cutlass, cruised around some build threads, but sofar i havent found how some guys are wiring the motor into the car, im looking to run aftermarket gauges, im pretty much wondering how you guys are wiring power to the cpu, and tieing the...

hey, im trying to pull my interior fuse box, and believe that i need to unhook the headlight harmess, i have the header panel off aswell, so those are ready to go in the box, fusebox is only hooked upto the colum still, just waiting for a nice day to pull the column, the 2 interior 7/32 screws...

so not much has been done to the car since the last post. i half blew the transmission, and blew a driveshaft doing about 120 down the highway, and decided to park it, and now, im parting most of it out, keeping a rolling chassis, and gonna put a cage in it, a 5 speed, 8.5 rear w/posi, gonna be...

hey guys, im looking into doing a 5 speed swap, seeing as how my trans dosnt like to shift until like 4500 rpm in 1st and 2nd, so just out of curiosity, what wil i need, i know im going to need the bellhousing, transmission, pressureplate, and the pedals, what else am i going to need, i figure...

hey guys, i ended up burying my car last night, and ended up blowing my water pump getting it out, just curious what pump i need, it's a factory 305, with the v belts, and i also seem to have lost my power steering, the belts still there, there's still fluid and all the lines are still attached...

id be interested in the whole rear, pm me and we can go from there.

im in the niagara area in ontario. we see some pretty treturous snow conditions through jan- aprilish

later on down the road i do intend on changing the gear up to a 3.11 or somthing like that, with a little more acceleration, but im looking for a quick fix for the one wheel issue, with the snow soon to fall

hey guys, this might ve a weird question but i have an open diff woth a 2.29 gear, im loooking for the best or closest way to get an lsd. but im laid off jext week and cant exactly foot the bill, so iv looked into a mini spool or iv been suggested to run atf in my diff... the minispool is sofar...

hey guys, nothing really new to update, but i got a set of bucket seats for a steal at 30 bucks a pop, and i put my steering wheel in, nothing really major, cleaned up someof my gremlins(dash illumination, fuel gauge), sway bar might be going on tonight... heres some pix for ya