Think I misunderstood your instructions, what I did is just note button travel by holding down the 1/4" square pin. Now second guessing is this what you want to see.
By holding the pin down will I be able to move the shifter button up & down " am I right??"
BTW how does one start a PM...
Have some photos hope that they are what you want. Will be in a WinZip file. With the shifter out and in a vice I note that when shifting there are some rough spots felt with the shifter button held down letting up on that the it moves free is that any help??
Have removed shifter needed to remove drivers seat but need to replace motor link in it anyway. Will get some photos for you and send them in a post. Or should we have a direct E-Mail connection to go further??
Sorry for the late reply I never got any e-mail telling me that I got the reply's. I am interested in a "rebuild" as I am reluctant to take the car out much for fear of having trouble. Where are you located at and what will this set me back. Cables you mention is that the one from shifter to...
Have 2 different issues here and asking for help.
Issue #1 Lighting Rods will on occasion lock in drive and I have a heck of a time to get to neutral/park/reverse. Know that the alignment here is very critical but can't find much info to help. Would be nice if there was someone in my area...
Have not seen the following items for sale at GBody.com and looked at some other sites with no luck.
First item New mounting gasket for between wing and deck lid
Second replacement "brush wipes for Lighting Rod Console ( this one may be a impossible find as a replacement)
No I can't say for sure it has been quite a while ago I ran across the doc and don't have a copy. I put it out there to see if some one could verify it.
Quite a while ago I remember seeing a TSB from GM on a change on the "Bellhousing" hope I called the part correctly?? What it was about was they added a small lip to the housing in the spot where the front pump is installed. Can any one remember or have this TSB that explains this, would...
This pertains to the "standard rod not the 1 & 2 rods. This is what is happening on occasion it does not want to shift out of Drive not sure what is causing this, is it a lubrication issue on the shiftier. repeated pushing down on the shiftier button and working it back and fort will get it...
They appear as "pitted" still in a sealed plastic package, and don't want to remove them as if sealed and not touched helps my case for replacement. Bought in Feb. of 2013 looked into PUI on the web my impression from the website is that they only work through re-sellers in my case that would...
Want to know if any of you have experienced the same problem I have. I purchased from GBody Parts.com a pair of Hurst Cutlass Rear seat inserts as the chrome on mine was peeling off due to one thing or another I never got aground to installing them. Got them out of storage the other day and was...
Here are some shots of the seal, it is listed in this form as "Unknown Seal" below the dim of the seal perhaps some one knows what the heck it is
Here is a rubber gasket I have left over from installing new gaskets for my sun roof. Gasket is 13' 3" in length and has several precut notches. In...
Does any one have the length of this seal ??? Did a earlier post as I have a seal and not sure what it is for. Could have been sent with some other seals as I bought new door seals and also seals for the Astro Sunroof. but I did not do the install that was done by a shop.
Here is a rubber gasket I have left over from installing new gaskets for my sun roof. Gasket is 13' 3" in length and has several precut notches. In from both ends 28" is a 3 1/2" notch also on the other side there are 2 notches in 43" is a 2" notch then in 54" is a 2 1/2" notch. I will try...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.