Search results

I want to run fender exit for a few reasons. I was told that i cant fabricate by a friend and i want to prove him wrong, also it looks completely badass, and i would rather have sound out the side of the car rather than underneath, i have a setup i copied from a friend of mine for mufflers...

im looking to make fender exit headers for my 85 grand prix. was wondering how any of you guys have done it or had it done, the more pictures i can look at the better, and what brand kits or what companies you guys prefer. i can probably squeeze them in without doing a major notch to the...

I bought the umi solid motor mounts for the frame and for the block and i couldnt find 4 holes that match up... and the solids have a different bolt pattern than factory mounts. this is also going into a 84 grand prix, idk if they didnt drill holes for the sbc or not but its kind of...

I have a bare 454 bbc bolted onto the TH400 i will be using in my car and i have it mocked up so i can fabricate my crossmember for the trans and weld on my motor mounts to the frame. i will be running a sbc 400 in this car and i want to know if using the bbc for mock up with change the location...

well i have been doing some more research and im going to do probably a 1.5" frame notch ( or more if i can get away with it ) and wheel tubs. there is a company i found that would add 2"s to my already 8" wide snowflakes so they would be 15x10 with 10.5 tires. so do you guys think with a...

Im planning on putting snowflake ws6 15x8 wheels on my grand prix drag car and i was wondering if anybody knows if they will be able to handle 600 horsepower hooking up on slicks.

I was doing some research and its been before to run a 10.5 slick on an 8 wide wheel. the 15x8 snowflake wheels from what i seen have 4.25 backspacing? i think? i want to run them on my 84 grand prix and was wondering if that much backspacing and factory length rear axle and factory wheel tubs...

this 9 inch housing is not aftermarket, it was probably cut out of a truck as it has the longer sleeves comming from the center section. would it be an option to buy a aftermarket 9 inch duplicate all the bracketry n such onto to mine and then send the thing back? what brand is yours?

i recently purchased a 84 grand prix and the previous owner has welded in a ford 9" rear end housing with brackets that connect to the stock rear suspension. i have a few friends that run the stock rear geometry with different springs and shocks. the car is in the process of being put on stands...