Ok so a while back I pulled out of my shop and all of a sudden no forward gears only reverse.
Yesterday I was under the car and I saw the vacuum line to the modulator was off. Now when I first have this problem I aded atf and it poured out just as fast as I put it in. I plugged the line back...
What needs to be done to get 22s to fit on stock monte Im doing tubs this week in the back for future llans & have already removed inner front fender plastics
I know this is gonna sound kind of stupid but I wanna raise my monte a few.inches.The reason being is I do paint&bodywork for a living & Ive got a liftd truck to get conversations going with the truck guys,a hotrod for those fellas a bike for those guys now the monte Im going either 19s 20s.or...
I need some help,here's what's going on 83 Monte had a 355 a little over 3 years ago I put it in&put very few miles on it before the trans started pouring fluid out of the top of the bellhousing&would.only go in reverse.So I started pulling the body apart to do bodywork&3 mos ago I pulled it...
Ok so not having a good day,ok a fast background Monte Carlo g-body had a 355 professionally built by a local speed shop about 3 year ago.11:1 compression &the old sbc starter didn't want to crank it when I first got it so I got a mini high torque starter from the builder would start with no...
Hey fellas about to get back to work on my monte...let le give you some info on the issues.Old motor blew up had a race shop build me a fresh 355&I put less than 100 miles on it as I was gonna wait on doing the body work&paint etc before I did more.
Well it sat...
Hello all I need some help with my 83 monte,I need to remove the doors but I have no idea what is needed to be done to remove the wiring that runs from the dash to the door.Any help would be greatly appreciated.
Please help id this 10 bolt posi I have a rear end that was in my grandfather's shop after he passed.Its a 10 bolt looks to be an 8.5 &it is a posi.The only codes I can find are one that says gm 49 another that says 12515002 &one more that has what looks like a o with a horizontal line in it...
Hey guys quick question.I know little about trannys but in my 83 monte sc I have a turbo 350 that has went bad&Im looking to buy a replacement&I thought all turbo 350s would change but someone else told me they bout one for there monte&it wouldnt fit???So are they all not interchangable>?Thanks!
Ok so in my 83 monte I pulled it out of my shop tonight & went to pull up my driveway that take you to the main drive&about half way up to my house I guess 400 feet or so....nothing it wasnt moving@ all I went through all the gears&the only one that works is reverse.I checked my fluid&it was...
Hey guys Im looking for help on putting a cage roll bar etc something in my monte carlo.I don't see the car doing under 10 sec in the near future but,I flipped a car awhile back&then I was with my old man&we flipped his truck&he broke his neck.Luckily I only got a cut on the same hand both...
Ok so I belive I'm gonna do the mustang 8.8 swap,there's a few things that I can seem to find much info on.
#1 what to do for the wheels besides run two different bolt patterns?
#2should I buy any certain axles?&
#3 what is a better rear the fox or s95?
#4what about drive shaft&yoke?
Plus I...
Hey guys I have an 83 sc,I'm about to get to the body work&Id like to know on the windows&tail lights how do I remove the chrome?On montecarloss.com In the non ss exhbit there's a guy's blue 81 with all of the chrome that looks to be exhbit there's a guy's blue 81 with all of the chrome that...
First off I'm a new member,I hope I'm posting in the correct place.Well I recently droped a 355 I had professional built in my 83 monte Carlo sc&I've allways had an aftermarket set of gauges oil water batt.Well what the problem is I use to have the water unit running to the head but when they...
First off I'm new here,I have an 83 monte with a professional built 355.I know very little about rear ends but I'm interested in the mustang 8.8,I can't seem to find a full write up on it but I'm still looking.What I would like to know is what do you do about the wheels?Do you keep gm in the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.