565bbchevy
Geezer From Michigan
- Joined
- Last seen
- Viewing thread Upper control arm bolts
Latest activity Postings About
-
-
I only ran the standard ply sportsman's on the fronts of my cars. Both the small block malibu and the big block chevelle. -
565bbchevy replied to the thread Advice on lowering my Monte.I had them on there for many years with no issues.
-
You should just be able to pull it up or down. If it’s not moving, the tensioning bar is either crooked, or your belt is folding up over...
-
565bbchevy replied to the thread Advice on lowering my Monte.I have a 2" drop in the rear and the front is about 1" drop in springs but the added weight of the big block in there actually makes it...
-
565bbchevy replied to the thread Advice on lowering my Monte.When I was first going with a frontrunner on my Monte I was lucky enough that my neighbor had some 15 x 4 Welds with those same 26" MT...
-
-
565bbchevy reacted to 88hurstolds's post in the thread GBOTM June GBOTM nominations thread! with
Like.
My junk... -
565bbchevy replied to the thread Remote electric water pump plumbed from heater to upper radiator?.I have this in in my Monte with the 565 BBC just in case I need the extra flow, mine is in the lower radiator hose...
-
565bbchevy replied to the thread GBOTM June GBOTM nominations thread!.My 86' Regal that I drive to work on nice days, I built a 355 SBC for it with aluminum heads and a Howards roller cam. I reinstalled the...
-
-
That's what all aftermarket sliders look like. Those bolt to aftermarket seats on one side, and whatever bracket fits your car & floor...
-
565bbchevy reacted to hunter_alexander's post in the thread So back with a new project. And its not an 87 442 in burgundy metallic. :) with Like.
Long story, but pretty good. Hope you all read it. Got off work Friday, went to my local watering hole to shoot some darts and...
-
565bbchevy replied to the thread Best Safety Glasses?.Other than the 2 pair of Dewalt goggles I bought for my garage, I also bought these Dewalt safety glasses for work with foam around the...
-
565bbchevy replied to the thread Best Safety Glasses?.I used to just use an old welding helmet with a clear lens for grinding until recently getting a piece of rust in my eye that ricochet...
-
565bbchevy replied to the thread Need help wit ideas on what to do wit inner fender ??.You could also drill and tap it and then use a Helicoil style insert so you can use the original size fastener.
-
yeah i'm pretty much only one driving it BUT i need the seat all the way back to get in. if i left it there i can't reach my controls so...
-
565bbchevy reacted to john87442's post in the thread What did you buy for your G-body today? [2024] with Like.
Had my steering wheel reworked along with the plate for the lightning rod shifter. Craft customs in Texas did the work. Now I know it’s...
-
-
Loading…
-
Loading…
