Search results

Man that is one beautiful Buick 👌🏽😎

I know Holley specifies that the mounts can only be used with their crossmember, but has anyone tried using Gforce crossmember with the Holley engine mounts?

Just missing a few small things to start putting this thing together.

Currie housing studs installed

So tapping it worked. I'm pretty stoked, didn't want to cut it out from the inside of the body. My only concern is that bit of cancer it has on the metal, I might have to cut off a bit and weld on some type of washer.

Thank you very much brotha. I wish I would've been done a long time ago. But with kids, work and school, I only work on it, when time permits it. Hopefully by the end of the year I'll have it running at least.

That might be an option as well.

I had been dodging this broken bolt, since I took off all the other body mount bolts. Well today I decided to tackle it. Sprayed the hell out of it for 3 straight with PB blaster. Used a stud extractor socket and turned it slowly by hand, and managed to take it out. The threads on the part that...

Had to get a new hoodie made with my logo.

Added all the front brake lines today, a long with new clips and bolts from inline tube. Also mocked up the Wilwood flexline.

Rear brakes arrived 😎

No sir, never did I'm just going to keep it, and if they lock up once they're installed, then I'll know it's the proportioning valve.

So I ended disassembling the Wilwood brakes today, since they were given to me assembled. I just wanted to make sure everything was torqued and that the bolts had loctite. Well glad I did! The person that assembled these did not add loctite to the bolts, plus the grease seal on the back was put...

Welcome

Torqued the spindle to the ball joints, and mocked up the Wilwood brakes On another note, if you're installing the UMI performance upper control arms with the tall ball joints, it's perfectly fine if you see the upper ball joint shaft exposed. I had to go through the instructions a few times 😆

Picked up my stuff yesterday from the powdercoater. Came out great. Hopefully I'll have some free time in the next few weeks work on it.

What's the widest tire someone can run with a frame notch?

I want to add that rear reinforcement to mine as well.