roger1
G-Body Guru 69 From San Angelo, TX
Latest activity Postings About
-
-
roger1 replied to the thread Fusible link.I'd use 40A fuses for the 2 wires into the bulkhead connector. Feed that fuse holder off the battery, not down to the starter. And... -
roger1 replied to the thread Fusible link.I didn't unpin them. I cut them off near the firewall bulkhead connector and connected my new 10ga wires to the short lengths of the 12ga.
-
roger1 replied to the thread Fusible link.A bad starter or solenoid will NOT be cause of burning out the fusible links. Since a short is likely you should use 40A fuses instead...
-
roger1 replied to the thread Fusible link.Also since an intermittent short is likely, DO NOT bypass the burned out fusible links. If you need those wires hooked up to help find...
-
roger1 replied to the thread Fusible link.You almost certainly have an intermittent short on one of the main 12ga wires coming from the starter. Either on the engine side of...
-
Nice work, that's done really well!!
-
roger1 replied to the thread Fusible link.Sure. Slot A - empty Slot B - 30A breaker for Headlight power at relays. I had to modify this fuse slot a little to get this...
-
roger1 replied to the thread Fusible link.Or this:
-
-
Loading…
-
Loading…
