Recent content by cutlass79

I'm trying to find out way my haz6lights works but my turn sign lights don't.over the winter I remove the ac/heater box off the fire wall and remover any unnecessary wires and rerouted and shortened a few and everything still worked till I unhooked the bat and put in a new starter hooked the bat...

http://www.ppg.com/coatings/matthewspai ... coats.aspx think i mit go with the satin and matte clears and see how thay turn out

yeah but only for and about in inch at the end of each bumpers unless i can get rubber strips for the bumpers that go all the way aound or something

well what im thinking with the bumpers is im going to keep the rubber strip thats on my bumper so i was thinkin about uesing that as the cut off point the rubbers on bouth the fornt and rear bumpers stop about in inch form goin all the way around my bumpers thats y i was thinking about doin it...

ok so i found this on autozone.com http://www.autozone.com/autozone/parts/ ... _542293_0_ i have the same step up sept mine has one pis guage not 2 like the one in the link.any way i can get it to work the fornt and rear bags with out t fittings so i dont have the body roll and have a psi guage...

well iv been playing with it in my head and what im going to do so i can keep some of my chrome and not black eveything out is paint the lower half of the bumpers black to match the car and leave the top half of the bumpers chrome paint my grill black to blend in with the matte black rally...

iv been thinking about putting a 4.3 vortec in the 81 cutlass im getting in the spring i think the 4.3 is a good motor and u can get good power out of them. id like to find a 2000 in newer 4.3 and a 6 speed trans behind it in just build a nice up to date driver out of it.do i nice spension and a...

i was just about to look u up on my other posts so i could pm u and ask what u uesed how long u had it and hows it holding up for ya?

o yall think a valve at each wheel would be better then the t fitting so i dont have the body roll

i have eveything i need to paint my car sept the clear im doing satin black with a mate not flat rally strips and need help finding a nice satin clear to go with i found a mate cleat and the auto part store that ima get and test on my old trans am fenders so i kno it what im looking for but i...

yeah in been thinkin bout that and i think i mit just do a Schrader valve a each wheel with a small psi gauge at each wheel also.just so i kno the fornts have the same psi side to side and same as the rear.i kno that mit seem like a pain to have to go form wheel to wheel but really i dont mind...

ok then yeah pretty much like that i didenr realize thats how u where doin it in the vid guess cuz i dident hear a compressor kick on lol.so i can just run the 2 fornt for a t then run the one line to the standard schrader valve and be fine same as the rear then.also what did u do with the...

ok so i havent post on this in a bit but im all ready to paint inside and out.i removed eveything sept dash im goin to mask it off and paint the inside aswell.iv tryed finding a shop around that mit let me rent a booth but no luck its a small town with just over 400 people in it so only one body...

i dont really want buttons\switches in the car i dont want something i can ''play'' with going down the road i mean it would be nice to be abul to bering her up a bit for roads that are bad but just dont want the tanks and eveything in the car thats y i was thinkin about just setting them up...

ok so iv been looking at pics in the 78-80 Monte Picture Thread and well now im in need to see yall 78-80 cutty pics so post um if u got um.i tryed posting pics of mine but cant get on to come up so ill try again later. but for now lets see some 78-80 cuttys pics