Ernest's latest activity

  • Ernest
    Well... allow me to help and get you started in the right direction. Regardless if you bought the carb new or used... to set it back to...
    • setting 1.JPG
    • setting 2.JPG
    • setting 3.JPG
    • advice 1.JPG
    • advice 2.JPG
  • Ernest
    The good thing is that you are running with a GM factory roller block, but modified to run a mechanical fuel pump. Everything else...
  • Ernest
    One typical culprit is the primary butterflys are open too far overexposing the idle transfer slots adding additional fuel over the idle...
  • Ernest
    Ernest replied to the thread Front end squeak.
    My mistake... i meant the wheel bearings in the rotor that ride on the steering knuckle, they could use repacking or need replacement...
  • Ernest
    Ernest replied to the thread Fuse box....
    Probably the best you're going to get for now...
    • g-body fusebox.jpg
  • Ernest
    Ernest replied to the thread Front end squeak.
    Check your steering knuckle wheel bearings... either needs greasing or replacement.
  • Ernest
    Ernest replied to the thread Shocks.
    I may have just changed my mind about the front and rear springs going with UMI instead of the EATON units. I've done some looking...
  • Ernest
    Continuing with what Drkuhar had posted with a video example...
  • Ernest
    I once thought about converting my '79 to '83 front end with the 4headlights cause it looked cool, but then the though of looking like a...
  • Ernest
    Ernest replied to the thread CUTLASS Trans question.
    Is that the original OEM throttle/transmission bracket and 2004R TV cable? if so, that cable needs readjusting or possibly replaced due...
  • Ernest
    Yes... very quickly. Im glad my malibu is still running the original style low/high beam halogens, havent lQQked to see if the "GUIDE"...
  • Ernest
    Ernest replied to the thread Funny Car Related meme's.
    • prank.jpg
  • Ernest
    Ernest replied to the thread Sequential taillights.
    Again.... make it easier on yourself, go on ebay/facebook marketplace/etc and look for a decent pair of '81-'83 entire tail light...
  • Ernest
    Ernest replied to the thread Shocks.
    Thanks for the heads up from EATON... what exactly would constitute the use of the heavy duty springs, using a big block in place of the...
  • Ernest
    Ernest replied to the thread Sequential taillights.
    Because of the two bulb system, you will not be sequential, but appear alterating... so dont use your turn signals at railroad...
    • train crossing.gif

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor