Ernest's latest activity
-
Ernest replied to the thread 10SI to 12SI Alternator.As im sure the 10SI 63A alternator is sufficient for my current needs... factory AC, Heater, no radio, no power locks/windows/seats, no... -
Ernest replied to the thread 10SI to 12SI Alternator.Still running original 3wire factory setup and would prefer to keep it that way, no mods.
-
-
Im currently running, what seems to be the standard 10SI/61A alternator thats installed for the '79 model year commonly used with...
-
Ernest replied to the thread Gates 27004 fuel hose.Figure once i get to 1/4 tank or less... i'll throw $30 worth of 90oct ethanol free fuel and see how that goes. I run a progression...
-
Ernest replied to the thread Gates 27004 fuel hose.Well then i guess its time to switch fuels, my static compression 10:1 ZZ4 has a dynamic compression ratio of 7.84:1 thanks to the...
-
Ernest replied to the thread Gates 27004 fuel hose.I just bought 6ft of the same line as the OP... 50psi max pressure and perfect for carburated setups like mine, only using 93octane/10%...
-
Ernest replied to the thread Funny Car Related meme's.
-
-
Ernest replied to the thread Funny Car Related meme's.I'll one up ya... Dodge M4S Turbo Interceptor. The Wraith 1986
-
-
Ernest replied to the thread Funny Car Related meme's.Similar IMO.... but updated and more aerodynamic. Demolition Man 1993
-
-
Ernest replied to the thread Merry Christmas.Pass on the MC and now its HNY to one and all!
-
Ernest replied to the thread Timing issue.You;ll know for sure after you take it for a drive... then check the timing again, if all is ok, just leave it alone, if not, rotate the...
-
Ernest replied to the thread Timing issue.Line up the tip of the rotor with the roll pin hole thats between the teeth.... thats the correct way. EDIT: Heres a full length shot...
-
-
Ernest replied to the thread Power Brake Booster.Other than that... just a direct bolt in. Both the master cylinder and brake booster i plan on buying are period correct for my '79...
-
Ernest replied to the thread Power Brake Booster.Nice to hear... i dont need anything fancy, just as long as it works. For a reasonable price, it cant be beat for brand new.... did you...
-
Ernest replied to the thread Power Brake Booster.Not that im into anything fancy looking, i found another, its brand new and the price is more than reasonable.... by SKP, anyone...
-
Ernest replied to the thread Timing issue.When replacing the distributor gear, heres a good bit of info on the subject when it comes to proper alignment. My aftermarket...
-
-
Ernest replied to the thread Timing issue.Its not two holes... the one towards the bottom is for the roll pin, the one towards the gear is a dimple, its to align it with the...
-
Ernest replied to the thread Timing issue.Hard to see, but those teeth look excessily worn... definately get a melanized gear in there and be to sure to coat it thoroughly with...
-
Ernest replied to the thread Joke of the day.
-
