Recent content by Tancrède

------ Seem to me, i saw nothing wrong with the valve cover out. I just tight all nuts of the rocker arm a little bit. Put a oil treatment like Barktol, STP or something like that will be my next move Tancrède

---- Big thanks guys Very usefull to be on this Forum This afternoon, i saw a expert in rebuilding motors. He told me to ajust the valve (rocker arm). By losse the nut until it flat(click) the more then, tight to it click the less and make one more turn and block-it. He said that it...

----------- Thanks 85 Cutlass Brougham The motor was running smooth. But last week, my ajustment of the choke was not good, and the motor, cool, turn very fast a few seconds. since that moment, it make a medium frequency click. In your process, you did not talk about taking out the...

Hi On a Cutlass Supreme 1981 267 or V8, is it conventionnal lifter ????? If i change a lifter, i have to take-out the motor head of course, but do i have to take-out also the head cylinder out ????? And how do i find the worn lifter ????? Thanks Tancrède

----- Hi On a Cutlass Supreme 1981 267 V8, is it conventionnal lifter ????? If i change a lifter, i have to take-out the motor head of course, but do i have to take-out also the head cylinder out ????? And how do i find the worn lifter ????? Thanks Tancrède

Hi Very touch my freind's Cutlass Finally, after one hour, testing with the water hose, i find that water come from 2 places of the chauffeur side. The stand of the Mototr wiper is connected (solded) to the firewall. Between this stand and the firewall, GM put some seal stuff, but left...

Hi I put some silicone seal on one deteriored place of the black Box system A/C and it seem that no more water is coming inside the car on that side(passenger side tought) On the opposite side, it seem that i have to take out the wiper system and his motor, to find the problem and put some...

------ Big thanks to everyone, 85 Cutlass Brougham, very good advices, thanks ---------------------- Just under the chrome metal of the front glass, the top of the firewall was rust and had some holes, i sealed very good. But beside the box system A/C, on the firewall, very very bad...

--------- Thanks hunter_alexander I prefer to take out permantly the system. Dont need cold, just the heating. I dont know about the seal, but there is rust and small holes in the firewall, and the only way i can repair that is to take out the climatisation (cold) system...

-------- Hi Water is coming inside the car, and i need to take-out permanently the climatisation system. Can i do that without providing the car of other important pieces ????? Because the external pannel of metal, rear the motor, have some rust and small holes, that i have to repair, of...