Search results

  1. MrSony

    Converting TBI to roller...?

    I'm just recycling it's fine
  2. MrSony

    Converting TBI to roller...?

    I got my intake used off of eBay. It's from 1993 :P
  3. MrSony

    Converting TBI to roller...?

    So, in essence, yes, but no. For an engine with 230,000 miles,in a rotten $1000 4x4 its worth the $200 in parts i have into it right now, and $200 in used tires, not much else. I bought it from my Grandma, it was her and my grandpa's truck, the last one grandpa owned and drove. But I made it...
  5. MrSony

    Converting TBI to roller...?

    Engine is still in the truck, and down to the short block. has the bosses in the lifter valley for the lifter holder thing. I've come to understand, I would need the following parts to convert my 1990 K1500 to roller cam -Roller lifters -Roller cam timing set -Lifter dog bone holder things -cam...
  6. MrSony

    What did you do to your non-G body project today? [2023]

    My biggest concern is what cam would play nice with the '90 truck computer if i did go roller.
  7. MrSony

    What did you do to your non-G body project today? [2023]

    seems to, yes.
  9. MrSony

    Buick 350

    whats no good about it? or are they one of those "we only do chevies here *buuurrrp*" kind of guys?
  10. MrSony

    What did you do to your non-G body project today? [2023]

    bosses for what?
  11. MrSony

    What did you do to your non-G body project today? [2023]

    Found a set on mp for $80. Look clean enough and no cracks, what the hell lets try it. Shame its a flat tappet engine though.
  13. MrSony

    What did you do to your non-G body project today? [2023]

    Passenger side head is cracked, sure driver's side is too. Yaaaay
  14. MrSony

    What did you do to your non-G body project today? [2023]

    Headgaskets blew on the k1500 after a heater hose popped, so doing that in 103f humid *ss bullshit *ss iowa weather. Got the rad out, intake off, all exhaust manifold bolts loose, driver's side accessories off, all thats left is the ac unit and it's bracket and the heads themselves. Sweat my...
  15. MrSony

    Gbody seat belt bolt torque

    They poke through the floor, take a wire brush to the threads to get any dirt grease and or undercoating off em.
  17. MrSony

    Getting my car to handle, What is my next step ?

    My car has most of the factory bracing (jounce and gp bar, fender to core support bars), and factory f41 spec front and rear sway bars. With wide tires, Bilstein shocks and new stock type springs, and new body bushings. it handles fairly well and surprises people that ride in it Body roll is...
  18. MrSony

    What did you do to your non-G body project today? [2023]

    stopped being lazy and got back to work on the f250 floor pans. having a girlfriend , i now realize i have to actually make my stuff accomadating to the opposite sex and/or passengers. Being blasted with dirt, mud, water, snow, etc while in the passenger seat isn't good.
  19. MrSony

    MALIBU Champion radiators...anybody used them?

    I had a 2 core champion that lasted quite a while, it ended up starting to leak from the tanks after a few years, and when i first got it i breathed on the overflow nipple (which is too small btw) with a 7/16 stubby wrench and snapped it immediately. I bought another 2 row but with bigger tubes...
  21. MrSony

    BUICK The Final Objective (Mission Accomplished, 7/23)

    hot damn
  22. MrSony

    What Did You Do To Your G-Body Today? [2023]

    definitely a risk vs reward deal, heavy on the risk.
  23. MrSony

    What Did You Do To Your G-Body Today? [2023]

    So, I re did the pan. New steel pan, with cork gasket. I tamped the holes down (i dont give a frogs fat *ss what the service manual and Internet says, anymore than snug with a nut driver is too tight), put a thin smear of rtv on the case where it was dripping from on the front passenger corner...
  25. MrSony

    What Did You Do To Your G-Body Today? [2023]

    Im fed up. I'm done. I've tried everything short of an expensive *ss aluminum pan to stop this MF from leaking everywhere. No matter what I do, gasket, no gasket just rtv, gasket with rtv, special atf resistant rtv, gaskacinch, cork, rubber felt, chrome pan, stock pan, steel aftermarket pan...
  26. MrSony

    3.8L V6 / wiring, vacuum routing on top of engine

    Still have the diagram on the fan shroud?

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor

Top Bottom