Search results

When you're measuring do both sides . It's a known fact that the rearend could be offset by 1/4" or more. When I did my Monte, I used Billet Specialites Street Lites 15x10 5.5" and a Frame notch/mini tub because I had 5 1/4" on one side and 5.5" on the other from the face where the wheel bolts...

Those are 87-90 Chevy Celebrity headlights

I've put the Viking double adjustable coil overs on the front of mine. The install was easy and rides better then the lowering springs. I'm currently installing the rears, but with the Quick Performance 9" the lower brackets don't fit. I'm presently making a set of lower brackets.

Isky Cams is a great company. When I first had my engine built (early 2009), I used the Red Zone lifter in it. I didn't get the car back together until early 2017. I put about 200 miles on it and lost 5 lifters. My builder sent them back to Isky to check out. Come to find out they had multiple...

Since he said he was going to race the car, he needs a cutoff switch to cut all power to the car to shut it off. Wiring the alternator to a junction point in the glove box will charge the system, but will still feed power to the car after the cutoff switch is shut off. You have to be able to...

Your going to need a cutoff switch. Here is what I did, Negative cable from battery to frame, then frame to engine block and body. Positive cable from battery to cutoff switch, from switch to starter, then to lug on fender to power any accessories. The cutoff switch is there to cut all power to...

When I did my frame notch, I reinforced all the control arm mounting points, tied the frame rails together from side to side and to the rear cross member.

I used the energy suspension inserts and trimmed the upper as described in Malibu Racing. It doesn't affect the mount

When I did mine, I tried the hooker competition headers from my 69 Chevelle. One side fit fine the other side, I would of needed to cut about 3/4" off the lower control arm bracket. Those headers had 2' tubes and I'm not sure of which model number they were. Even that being said my 2241's, I...

I didn't have any problems with the factory wheels or a old school rallies wheels. I think the problem lies in the Billet Specialites 15" wheels, as their design doesn't take in the possibility of larger brakes. The only option they gave me was to use a wheel with 7" of backspace. So what brake...

I also had Wilwood 12" brakes on mine when I first put it together. The stock 15" wheels fit fine. After I notched the frame, I bought 15" Billet Specialites Street lites with 5.5" backspace and they would not clear the calipers. I ended up with a package from Aerospace Components rear Pro...

You really need to measure, the depth of the wheel well and the flange or face of axle to frame. When I did mine, I had 11.25" on one side,11.5" on the other, from wheel lip to the inside of the well. Also 5.5" from flange to frame. With that a rim with 5.5" bs would hit the stock frame. I run...

Here's a few pics: Fans Oil Cooler with fans and oil lines Accusump Remote oil filter in there somewhere (lol)