Search results

Winter Blends will not enhance a pinging problem, more so correct it since ethanol is added. EGR valves sticking will cause low RPM sluggishness and stalling if the valve is stick open, but EGR in itself supports less pinging because combustion temps are lowered. Fuel pressure would throw a...

Where's the blizzard, I can see pretty clearly. Lake effect snow here dump just as much with absolutely no warning!

Done many a S10 drop using bags in which the Gbody uses the same suspension. Trucks are pretty bad themselves but a relocated set of shocks on a G body will kill it!! Save the money and do a Shock Wave type air bag and shock on the front, rear doesn't matter!!

First up do some research on the subject! You'll find 10's of thousand or more people running sub 550 H.P. and 500 Ft lbs of torque have been running the popular easy to find and buy GM 10 bolts both on the street and strip with not one problem ever occurring. Enemies of these 10 bolts are...

http://en.wikipedia.org/wiki/1st_Battalion_9th_Marines http://acroeng.adobe.com/byteserving/op ... arines.pdf http://www.thewalkingdead.org/honorroll/powmia.html http://www.theveteransvoice.com/TheWalkingDead19.html Many sources, same insignia!!!

No they do not offer a performance gain at all. "IF" you actually need more air flow than the stock unit offers, then run a taller filter setup. They let dirt into your engine a paper unit will not, PERIOD end of story!! Fancy filters are just a way to make a profit!!! If your really looking...

Need to know heads first. Pre 1986 416 heads any pre 86 normal GM intake. 081 post 1986 heads take a special head for that year and a few other years. Vortec intake it to be used for 1996+ vortec heads!

Oh I full well know since the advent of rules in NASCAR is when the cheating began thats why IMO opinion it sucks. The 2 named I stated were the winningest drivers for their time in the sport and they cheated also and more often caught over the years than any other driver. How would they have...

Nascar lost its luster in the 70's for me. Cheating became the way to win races and no was better for it at the time than someone known as the King called Petty. Teams used every imaginable way to win. Oversized fuel lines to carry a little more gas. Compounds put on the tires during pitstops to...

No not really. The stall speed will depend on how much power it'll end up making and where the cam choice puts that power. The factory stall would be enough, but if you pushed the powerband up then you might want to go up a few hundred rpm in stall speed!

The 416's and 081's will flow somewhere near 200 CFM+ @ .500 lift. On the exhaust side 120 or so @ .500 lift. The highly prevalent 882 heads of a 350 which are about the only ones you can get cheap can't even match those numbers. 200 CFM in the intake side can take a motor up to 325+ H.P. with...

Whoa a little bit! 416's and 081 HO 305 heads may not be the best heads, but pretty decent heads supporting 325+ ponies in stock form. There are not that many 350 heads that are much better until you've dropped alot more coin than what he got them for. The most prevalent 350 heads sub $300...

There is also aftermarket under engine braces that are more well made than the factory ones. Yes thats one step up. Even with the F41 bars the frame horn still flex's from the force applied by the steering box and the one I stated I had and this one really stops any movement at all. This...

Exactly , just something to wipe the old behind with. Someone brought up technology changes and people getting ripped off from the not knowing. Even with ASE certification this goes on worse today than it did before. I can't count the number of times I have heard and seen that when a car throws...

HUM, last post removed!! ANYONE can pass a ASE test as long as they study and have half a brain and some mechanical ability. They offer books very much along the lines of ones for passing a GED because its that hard, er simple! I'm sorry if this offends, but back in my day mechanics didn't...

There is one that ties the 2 front frame horns together I believe Kirban is where I got mine is a must. I had read these frames separate badly when you steer which the F41 braces on the front don't come close to fully fixing. There right this piece which triangulates the front made a wild...

I laughed so hard when I saw it listed. He poked at everybody and I can't blame him one bit and actually it might be something I would do. Poked at the judges and poked at Ebay and its patrons. How many times I see $.98 resistors 4.7K ohm resistors in some kind of box advertising 60 H.P. gains...

I wish Walmart sold more AutoParts because then I could just get then myself and leave. AutoZone, Advance around here is just a joke. Not one brain behind the counter and a store full of sticky things and chromy looking parts. If I have to go to one of these stores because my other 2 with...

I have no rant because I now find going to any store, anywhere you will get the same thing. I thank continuing education and the computer age for it. Too many degreed people that can't find jobs with the degree they have so their stuck doing this stuff which is equal payback for not learning...

Did you replace the receptacle with it???? If they don't make good solid contact then you get spark jumps that will eat the ends up.