New Stamped Ford 9 Inch HD Rear End Housing for 1978-1987 G-Body GM Cars

Ford 9 Inch for G

 Body New Flanged Housing 58″ Track width, Stock pinion Location with Big Ford Housing Ends.  1978-87 GM Midsize Cars.

• Wheel mounting flange to wheel mounting flange )track width) will be 58″ with axles installed (2 1/2″ offset axles)

• Stock rear end pinion yoke location between wheel flanges when center section is installed.  

• Standard driveshaft location to the right exactly like a General Motors rear (1/2″ to the passenger side).

• Stock Style Spring Perches installed

• Stamped Housing with new 3″ x .188″ wall DOM tubing.

• new studs installed in housing

• CHOOSE housing ends; Big Ford New Style (torino) with .375″ (3/8″) bolt holes  OR  Old Style big ford with .500″ (1/2″) bolt holes, refer to housing end drawing in Pictures
• new studs installed in housing
• 3/4 npt drain plug on bottom of housing  (not shown)
• Drain plug can be left off housing if Requested when you order.
• No Fill in back of housing (gear filled through gear/center section).

will ship via UPS Ground or Speedee Delivery in the upper Midwest.