Tag: edelbrock

Posted on by — Leave a comment

Edelbrock AVS2 SeriesGäó Carburetor For 1978 Oldsmobile Cutlass A6B15C-9368

item image
 Buy Now
Facebook Twitter Pinterest

Price: 54500 USD

Edelbrock AVS2 SeriesGäó Carburetor For 1978 Oldsmobile Cutlass A6B15C-9368 CARB-AVS For 1978 Oldsmobile Cutlass A6B15C-9368 Available: In Stock CARB-AVS For 1978 Oldsmobile Cutlass A6B15C-9368 Will fit the following model: 1978 Oldsmobile CutlassEngine: V8 5.7 – 350 Fitment Notes New 650 cfm Square Flange Non-EGR Electric Choke SatinAdpt. PN2732 Must Be Used When Installing On Certain Intakes~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Proper Installation Is The Responsibility Of Installer May Void Warranty1 required per vehicle Designed and Calibrated For Optimum Street Performance Features Annular Flow Primary Boosters Timed And Full Vacuum Ports For Ignition Advance Delivers Improved Fuel Atomization To Eliminate Flat Spots Improved Flow Metering Make It Ideal For Small/Big Block Engines For Single Or Dual Plane Intake ManifoldsDescriptionThe Edelbrock #1906 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a new calibration for improved off idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the

Posted on by — Leave a comment

Edelbrock Performer EPS Intake Manifold For 1978 Oldsmobile Cutlass 21130E-AEFC

item image
 Buy Now
Facebook Twitter Pinterest

Price: 25595 USD

Edelbrock Performer EPS Intake Manifold For 1978 Oldsmobile Cutlass 21130E-AEFC MANIFOLD For 1978 Oldsmobile Cutlass 21130E-AEFC Available: In Stock MANIFOLD For 1978 Oldsmobile Cutlass 21130E-AEFC Will fit the following model: 1978 Oldsmobile CutlassEngine: V8 5.7 – 350 Fitment Notes Cast Finish Idle-5500 rpm Non-EGR Dual-PlaneFor Pre-Pollution Controlled Or Race Use Or Engine Swaps~Not Legal For Use On Pollution Controlled Vehicles1 required per vehicleN/A Engine Intake Manifold Maximizes Performance with Edelbrock Carburetors Runner Design Tuned For Peak Torque Maximizes Peak Torque Around 3500 RPM Excellent Throttle Response and Mid-Range Power For Idle to 5500 RPM Street-Driven Performance Dual-Plane Low-Rise Intake w/180 Deg. Firing Order Prod. +5 HP and +9 ft./lbs. of Torque Over PN[2101]DescriptionEdelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer

Posted on by — Leave a comment

Edelbrock E-Street Cylinder Head For 1978 Oldsmobile Cutlass Supreme 85FE3B-2A60

item image
 Buy Now
Facebook Twitter Pinterest

Price: 148700 USD

Edelbrock E-Street Cylinder Head For 1978 Oldsmobile Cutlass Supreme 85FE3B-2A60 CYLINDER HEADS For 1978 Oldsmobile Cutlass Supreme 85FE3B-2A60 Available: In Stock CYLINDER HEADS For 1978 Oldsmobile Cutlass Supreme 85FE3B-2A60 Will fit the following model: 1978 Oldsmobile Cutlass SupremeEngine: V8 5.7 – 350 Fitment Notes Complete 185cc/60cc Intake/Exh. Port Vol. 300-400HP Standard Intake Flange Straight Plus Type 64cc Chamber Vol. PairLegal For Use On Pre-Pollution Controlled VehiclesFor Use In Hydraulic Flat Tappet Camshaft Applications~For Use On Pre-Pollution Controlled Vehicles (PPCV)1 required per vehicle Entry Level Street Performance Upgrade A356 Aluminum Sold As A Pair Edelbrock Quality And Performance Affordable Price Made In U.S.A.DescriptionThe Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range. The modern combustion chamber designs improve the combustion process and larger than stock intake and exhaust ports move more air through your engine for improve efficiency. For use on pre-pollution controlled vehicles only. **Please note some of our listings use stock photos which may be slightly different than the actual product. Will

Posted on by — Leave a comment

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Salon 58F3C2-1

item image
 Buy Now
Facebook Twitter Pinterest

Price: 60300 USD

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Salon 58F3C2-1 CARBURETOR For 1978 Oldsmobile Cutlass Salon 58F3C2-1FF9 Available: In Stock CARBURETOR For 1978 Oldsmobile Cutlass Salon 58F3C2-1FF9 Will fit the following model: 1978 Oldsmobile Cutlass SalonEngine: V8 5.0 – 305Vin Contains: HEngine Code: LG4 Fitment Notes New 4 bbl. 600cfm Square Flange 4150 Electric Choke Single Fuel Inlet Capability Gasoline Mechanical Secondary w/Velocity Air ValveAdpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~CARB E.O. D-215-10~EGR Adapter PN[1476] Sold Separately~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer May Void Warranty~Universal Throttle Linkage Type Satin Finish EGR Compatible1 required per vehicle Bolts On And Runs Right Out of The Box Dependable Street Performance/Smooth Throttle Response Factory Set Float Levels; Adjustments Are Rarely Needed 2-Piece Design Means No Gaskets Below The Fuel Level Installation And Tuning DVD Included With Every New Carb Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain Incl. Both Timed And Full Vacuum Ports For Ignition Advance EGR And Fuel Vapor Outlet Calibrated for Maximum Fuel Economy Made

Posted on by — Leave a comment

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Calais E7C808-

item image
 Buy Now
Facebook Twitter Pinterest

Price: 60300 USD

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Calais E7C808- CARBURETOR For 1978 Oldsmobile Cutlass Calais E7C808-1002 Available: In Stock CARBURETOR For 1978 Oldsmobile Cutlass Calais E7C808-1002 Will fit the following model: 1978 Oldsmobile Cutlass CalaisEngine: V8 5.0 – 305Vin Contains: HEngine Code: LG4 Fitment Notes New 4 bbl. 600cfm Square Flange 4150 Electric Choke Single Fuel Inlet Capability Gasoline Mechanical Secondary w/Velocity Air ValveAdpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~CARB E.O. D-215-10~EGR Adapter PN[1476] Sold Separately~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer May Void Warranty~Universal Throttle Linkage Type Satin Finish EGR Compatible1 required per vehicle Bolts On And Runs Right Out of The Box Dependable Street Performance/Smooth Throttle Response Factory Set Float Levels; Adjustments Are Rarely Needed 2-Piece Design Means No Gaskets Below The Fuel Level Installation And Tuning DVD Included With Every New Carb Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain Incl. Both Timed And Full Vacuum Ports For Ignition Advance EGR And Fuel Vapor Outlet Calibrated for Maximum Fuel Economy Made

Posted on by — Leave a comment

Edelbrock AVS2 SeriesGäó Carburetor For 1978 Oldsmobile Cutlass Supreme 92FD5F-3

item image
 Buy Now
Facebook Twitter Pinterest

Price: 50500 USD

Edelbrock AVS2 SeriesGäó Carburetor For 1978 Oldsmobile Cutlass Supreme 92FD5F-3 CARB-AVS For 1978 Oldsmobile Cutlass Supreme 92FD5F-35D5 Available: In Stock CARB-AVS For 1978 Oldsmobile Cutlass Supreme 92FD5F-35D5 Will fit the following model: 1978 Oldsmobile Cutlass SupremeEngine: V8 5.0 – 305Vin Contains: HEngine Code: LG4 Fitment Notes New 650 cfm Square Flange Non-EGR Manual Choke SatinAdpt. PN2732 Must Be Used When Installing On Certain Intakes~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Proper Installation Is The Responsibility Of Installer May Void Warranty1 required per vehicle Designed and Calibrated For Optimum Street Performance Features Annular Flow Primary Boosters Timed And Full Vacuum Ports For Ignition Advance Delivers Improved Fuel Atomization To Eliminate Flat Spots Improved Flow Metering Make It Ideal For Small/Big Block Engines For Single Or Dual Plane Intake ManifoldsDescriptionThe Edelbrock #1905 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a new calibration for improved off idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate

Posted on by — Leave a comment

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Supreme BFBBF9

item image
 Buy Now
Facebook Twitter Pinterest

Price: 53100 USD

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Supreme BFBBF9 CARBURETOR For 1978 Oldsmobile Cutlass Supreme BFBBF9-B380 Available: In Stock CARBURETOR For 1978 Oldsmobile Cutlass Supreme BFBBF9-B380 Will fit the following model: 1978 Oldsmobile Cutlass SupremeEngine: V8 5.7 – 350 Fitment Notes New 4 bbl. 600cfm Square Flange 4150 Electric Choke Single Fuel Inlet Capability Gasoline Mechanical Secondary w/Velocity Air ValveAdpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Fuel Economy~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Proper Installation Is The Responsibility Of Installer May Void Warranty~Universal Throttle Linkage Type Satin Finish Non-EGR Compatible1 required per vehicle Bolts On And Runs Right Out of The Box Dependable Street Performance/Smooth Throttle Response Factory Set Float Levels; Adjustments Are Rarely Needed 2-Piece Design Means No Gaskets Below The Fuel Level Installation And Tuning DVD Included With Every New Carb Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain Match With A Variety of Manifolds Not Recommended For Performer RPM or Torker II Manifolds Incl. Both Timed And Full Vacuum Ports For Ignition Advance Made In The U.S.A.DescriptionThe Edelbrock 1406 Performer

Posted on by — Leave a comment

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Salon 9EF68F-F

item image
 Buy Now
Facebook Twitter Pinterest

Price: 59700 USD

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Salon 9EF68F-F CARBURETOR For 1978 Oldsmobile Cutlass Salon 9EF68F-FD6A Available: In Stock CARBURETOR For 1978 Oldsmobile Cutlass Salon 9EF68F-FD6A Will fit the following model: 1978 Oldsmobile Cutlass SalonEngine: V8 5.0 – 305Vin Contains: HEngine Code: LG4 Fitment Notes New 4bbl. 500cfm Square Flange 4150/Dual Quad 4150 Electric Choke Single Fuel Inlet Capability Gasoline Mech. Secondary w/Velocity Air ValveAdpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Not For Computer Controlled Vehicles~Proper Installation Is The Responsibility Of Installer May Void Warranty~Universal Throttle Linkage Type Satin Finish Non-EGR Compatible1 required per vehicle Bolts On And Runs Right Out of The Box Dependable Street Performance/Smooth Throttle Response Factory Set Float Levels; Adjustments Are Rarely Needed 2-Piece Design Means No Gaskets Below The Fuel Level Installation And Tuning DVD Included With Every New Carb Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain Compatible w/Dual-Quad Apps such as C-26/F-85/Street Tunnel Ram Incl. Both Timed And Full Vacuum Ports For Ignition Advance Made In The U.S.A.DescriptionThe Edelbrock 1403 Performer Series

Posted on by — Leave a comment

Edelbrock RPM Air-Gap Intake Manifold For 1978 Oldsmobile Cutlass Supreme Base 8

item image
 Buy Now
Facebook Twitter Pinterest

Price: 43500 USD

Edelbrock RPM Air-Gap Intake Manifold For 1978 Oldsmobile Cutlass Supreme Base 8 MANIFOLD For 1978 Oldsmobile Cutlass Supreme Base 882FD3-C072 Available: In Stock MANIFOLD For 1978 Oldsmobile Cutlass Supreme Base 882FD3-C072 Will fit the following model: 1978 Oldsmobile Cutlass Supreme BaseEngine: V8 5.0 – 305 Fitment Notes Cast Finish 4 bbl Carb 1500-6500rpm Non-EGR For Square-Bore Carbs Street/Hi Perf. Use OnlyFor Pre-Pollution Controlled Or Race Use Or Engine Swaps~For Pre-Pollution Controlled Vehicles Or Engine Swaps~Not Legal For Use On Pollution Controlled Vehicles~Recommend Edelbrock Gasket PN[7201] for Manifold Gasket1 required per vehicleN/A Engine Intake Manifold Based on Performer RPM-Series with Unique Air Gap Bright Silver Chrome Finish That Will Not Discolor Designed for 1500 to 6500 RPM Street-Driven Power Dual-Plane High-Rise Intake For Square Bore Carburetors OnlyDescriptionEdelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. **Please note some of our listings use stock photos which may be slightly

Posted on by — Leave a comment

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Calais DB1F4B-

item image
 Buy Now
Facebook Twitter Pinterest

Price: 53100 USD

Edelbrock Performer Series Carburetor For 1978 Oldsmobile Cutlass Calais DB1F4B- CARBURETOR For 1978 Oldsmobile Cutlass Calais DB1F4B-4AF1 Available: In Stock CARBURETOR For 1978 Oldsmobile Cutlass Calais DB1F4B-4AF1 Will fit the following model: 1978 Oldsmobile Cutlass CalaisEngine: V8 5.0 – 305Vin Contains: HEngine Code: LG4 Fitment Notes New 4 bbl. 600cfm Square Flange 4150 Electric Choke Single Fuel Inlet Capability Gasoline Mechanical Secondary w/Velocity Air ValveAdpt. PN2696 Or Kit PN2697 Is Required~Adpt. PN2732 Must Be Used When Installing On Certain Intakes~Calibrated For Fuel Economy~For Use On Pre-Pollution Controlled Vehicles (PPCV)~New Fuel Filter Between Fuel Pump And Carb Is Required~Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~Proper Installation Is The Responsibility Of Installer May Void Warranty~Universal Throttle Linkage Type Satin Finish Non-EGR Compatible1 required per vehicle Bolts On And Runs Right Out of The Box Dependable Street Performance/Smooth Throttle Response Factory Set Float Levels; Adjustments Are Rarely Needed 2-Piece Design Means No Gaskets Below The Fuel Level Installation And Tuning DVD Included With Every New Carb Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain Match With A Variety of Manifolds Not Recommended For Performer RPM or Torker II Manifolds Incl. Both Timed And Full Vacuum Ports For Ignition Advance Made In The