1995 S10 rearend ???

[RITTER]

I found a rear-end from a '95 S10 with 4.11 posi setup for $150

Some questions:
-What spline axles would these be?
-Would this be the same width as a GBody rear-end?
-Would it be more cost effective to have brackets welded it the rear-end or swap the internals into my rear-end housing?

 

[jrm81bu]

I found a rear-end from a '95 S10 with 4.11 posi setup for $150

Some questions:
-What spline axles would these be? 28 or if its from a zr2(8.5) pssibly 30
-Would this be the same width as a GBody rear-end? Nope.
-Would it be more cost effective to have brackets welded it the rear-end or swap the internals into my rear-end housing?As long as it is a 7.5, then I would just swap internals. Keep in mind Mosier axles will run ya 250 or so. And with it being a truck the stock posi may be the gov-lock unit which isn't all that strong.