can ya give me a estimated hp+tq rating for my set up

[1983regal4door]

1973 0014 2 bolt block factory dished pistons stock deck and bore,92 305 heads 58cc with 1.84-1.5 valves,204/214 cam 420-442 lift,headers,edebrock performer intake ,edelbrock1407 750cfm,hei dist with accel coil and wires,87 monte ss 200r4 czf transmission with shift kit,serpentine set up off a 89 caprice,Lincoln mark 8 fan,and granny gear 2.41 swappin for 4.10 reaaaal soon thanks for input in advanced

 

[stomis]

Ughh is it a 305 or a 350 or what?

If its a 350 I'd say its probably in the range of 250-300.

 

[1983regal4door]

350

 

[stomis]

Yeah I'd say high 200s maybe 300. Heads are definitely your limiting factor like usual.

 

[1983regal4door]

yea im trying to find some vortecs at pullapart but cant find the right ones non have the 3 humps in the front

 

[stomis]

yea im trying to find some vortecs at pullapart but cant find the right ones non have the 3 humps in the front

3 humps in the front? I've never heard of visually identifying vortecs. Just find a 96+ truck with the vin code for a 350 and pull the heads. 062s or 906s it dont really matter. The differences are minute.

 

[1983regal4door]

i thought the right one where the ones with the humps .......so there are only 2 350 vortec heads the 062 and 906?

 

[stomis]

i thought the right one where the ones with the humps .......so there are only 2 350 vortec heads the 062 and 906?

As far as I know. But as usual I like to cover my *ss with "I could be wrong"