Hey ppl, just wondering if anyone has a pic, or part numbers or whatever to ALL the trim clips used on the side molding. Heres a rundown on what I do have for both sides LH & RH.... 2 for the piece in front of front wheel, 1 for the piece behind front wheel, all the clips for the doors(10), and the 2 for the rear of rear wheel. But I do not know what the one for the piece infront of the rear wheel is or looks like,how many, and how does it attach? I keep getting part numbers that lead me to this round pin looking thing. Is this right? Please guys help a brotha out! I would love to see what all of them look like and locations just to be sure, or does anyone still have this info.....
Cutlass Side Molding Clips
- Thread starter Raven87
- Start date
- Status
http://www.GbodyOlds.com/forum/showthre ... ing-Window
Many of those clips are still available from body supply shops and GM.
Beware of people marking these up on eBay and such.
A rule of thumb is if you see any NOS parts commonly sold it's still available else where for much less.
One good example is the bumper cover chrome strips.
Many of those clips are still available from body supply shops and GM.
Beware of people marking these up on eBay and such.
A rule of thumb is if you see any NOS parts commonly sold it's still available else where for much less.
One good example is the bumper cover chrome strips.
I need the bumper cover strips too, ive seen them on ebay and gbody. Id like the info on them too(where to get cheaper and GM #'s) Hey, you don't know anything about how that piece of molding attachs do you? Its the piece if front of the rear wheel.Is it held on by those little round clips?Or am I just not getting it lol! Its part number 22506785 I think. I just cant figure out how they attach/remove. Do you have to get to them from the back, im assuming there is a pin on the body that sticks out??? I have to remove mine one day and was just trying to figure it, the rest of the molding I know how.
The front rear quarter moldings are held on by three round clips and the edge is tucked under the wheel well molding.
How are they laid out, are there 3 across the top,bottom, staggered 1 top 2 bottom? Im trying to figure out how to get it off, I know I f have to pull the wheel well molding off because it holds the back edge, but does the trim piece pull up and out like the rest of them?
- Status
Similar threads
