cutlass with an SS wing
- Thread starter 85Supreme
- Start date
- Status
I think FE3X CLONE did it on his cutlass, u might send him a pm and see what he says. He was more than helpful with me on the gages he used
These pictures are of the later "laydown" style spoiler. Might give you an idea but as you can see, the body work isn't finished at all.
It fits pretty close everywhere. It appears to only be slightly off at the very curve of the trunk lid however once its bolted down and the trunk closed, you can't tell.
The only adjustment I've had to make so far is trimming the underside of the "wings" at each end that go over top of the taillights. They were rubbing against my taillights with the trunk closed so I shaved them down until I had about an 1/8" gap or so.
It fits pretty close everywhere. It appears to only be slightly off at the very curve of the trunk lid however once its bolted down and the trunk closed, you can't tell.
The only adjustment I've had to make so far is trimming the underside of the "wings" at each end that go over top of the taillights. They were rubbing against my taillights with the trunk closed so I shaved them down until I had about an 1/8" gap or so.
I'm sure some of the Monte guys can clarify but I thought it was the '85 and up. Might only be an '87/'88 thing too. Not entirely sure.
- Status
Similar threads
