Hello everyone i need someones opinion on if i have a defective tv cable or not. I instaslled a 2004R from monster transmission and everything worked out great except my shifts are what they call stacked shifting, when i adjust the tv cable correctly to my specs it keeps getiing slack in it in other words it has no tension when it when i open it to WOT im very clueless right now i think i need a new TV cable
Defective TV?
- Thread starter 78PontiacGP
- Start date
- Status
I would contact the trans company you bought it from,not sure if it relates but i knkw you have to upgrade a cable when you upgrade a.clutch on a stick maybe you need a stronger cable probally not to factory specs anymore either.
I just had problems with mine but the actuator arm was broken so mine had no tension. Had to go to the trans shop to find that out. As far as I have read up on these trannys, there is only one way to set them and you shouldn't adjust from there because you risk damaging the transmission.http://www.tvmadeez.com/article/index.php
did your can originally come with a 200-4r or 700 transmission, and what brackets are you using? pics would help
Its an automatic, and im about to have a sh*t fit the cable line supposed to have tension in it not slack and the cable dosent retract when i pull the excess wire, the cable must be defective
check to see if its even hooked up at the trans the end of the cable just hooks in, let me find a pic
Im adjusting it when its at WOT but then when its suppose to self adjust i keep loosing the tension and wind up with a slack cable. 😢
- Status
