dyno dogs

[gbondo57]

Give me your best guess on this build, please. SBC 355, hyperutectic slugs, .275 dome. 72 or 76 cc, 1.94 n 1.5 polished chambers n ported valve throats. 462624 heads Screwins no guides COMP 284/294 n .541/.544 with 1.6 rockers. best guess on c/r is 10.5 Cast crank, balanced. Wuddua think?

 

[o ARC ATHEISTxX]

380 - 420 HP to the fly.
Nice flowing heads and a similar cam are at about 420-430 HP
I dont know the extent of you head-work but i assume its not to par as new castings.
The 10.5-1 ratio should bump your hp a bit up so final answer would be 410Hp

You still need to post you carb, intake, exhaust.

 

[gbondo57]

Headers are 1 5/8 2466 hookers. Performer RPM with Holley 650 DP, or 750 vac sec. ANNNND, I've got a tunnel ram setup I've put together. 2 390 CFM's sideways, vac. sec. (780 total cfm with 4 barrels constant) with center pivot bowls and secondary metering blocks, on an edelbrock street Tunnel Ram. I set it up on a nice 305 in the 79, to tune n tweek it. 350 cam runs to @ 6500. Two machine shops guessed @ 400 HP also. My son is going to sh*t his pants?!?! Yeah, this one's for his 87 El Camino. P.S. I lived in L A for 10 years, left in late 92.