I bought a Dualjet 210 carb with an electric choke to replace my old vacuum choke carb. The problem I have is the replacement carb doesn't have a provision for the PVC to hook back up..... Can I just route this to where the charcoal line would go??
Electric choke conversion
- Thread starter cblazer1500
- Start date
- Status
No. The PCV needs to be plugged into a vacuum source. The charcoal port is not a vacuum port.
Are your 2 carbs pretty much the same except for the choke and PCV ports? If so, just swap throttle plates.
Are your 2 carbs pretty much the same except for the choke and PCV ports? If so, just swap throttle plates.
- Status
Similar threads
