Electric Door Swap

Status
Not open for further replies.

westboundmack

Not-quite-so-new-guy
Jun 29, 2012
9
0
0
SOCAL
www.youtube.com
What's up fellas! Just wondering what all is needed to swap doors from manual to electric. I have the doors with switches and harnesses. What else is needed? I need a full rundown on relays, other harnesses, and what ever else i might need. All info is appreciated.


Mack
 
Nobody has any info on this? I know somebody has some experience with this... 😀
 
Welcome to the site. This is the most recent of your three threads on this topic, so I'll post here. Check out the below thread:

viewtopic.php?p=71132

I did this swap a few years ago, so I'm a bit rusty, but as the thread above mentions, you'll need everything related to power windows from your donor car, to include the motors, regulators, each door harness that connects the motors and switches to the dash harness, and cross-car dash harness (I impatiently ripped the donor dash to pieces to get it out), and power switches. You'll also need power door panels for your new switches. The swap is kind of a pain in the *ss but not difficult-just tedious.
 
79CMC said:
Welcome to the site. This is the most recent of your three threads on this topic, so I'll post here. Check out the below thread:

viewtopic.php?p=71132

I did this swap a few years ago, so I'm a bit rusty, but as the thread above mentions, you'll need everything related to power windows from your donor car, to include the motors, regulators, each door harness that connects the motors and switches to the dash harness, and cross-car dash harness (I impatiently ripped the donor dash to pieces to get it out), and power switches. You'll also need power door panels for your new switches. The swap is kind of a pain in the *ss but not difficult-just tedious.

First off thanks for the help bro. My doors are totally complete as far as the stuff needed there, the entire door(s) was taken off of the donor car, so i'm good on that part. My main concern was the stuff under the dash. I know there had to be another harness, an figured there would be some type of relays as well.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor