f body spoiler question????

[deadman19]

for those of you who have done the f body spoiler mod, the guys who made the spacers for the spoiler what did you use? what material was used to construct them, id really rather not trim the tips. thanks in advance.

 

[galeaiii]

I have a f-body spoiler on my Monte, no trimming or spacers were needed and the turn down ends are 3/4" from the front end to the top of the quarters.

 

[81cutlass]

I built resin cast spacers for mine and duraglassed them on and sanded the joint smooth. I then removed the short studs and put in longer ones. Wasnt sanded out completely here yet in the pic I showed. If your interested I might be able to cast up a set sometime when Im home next. I think I get $35 for them, I can look and see what I charged last time. They include mounting diagram, spacers, studs, and mounting hardware.

 

[deadman19]

thats awesome man thanks for the reply gave me a good idea!

 

[badlad]

That looks very much like a spoiler i took off from a mitsubishi don't know what make or model was about 10 years ago. I put it on my o 84 cutlass I sold a few years ago, R.I.P casper. I like to spoil my cars too, lol.

 

[CWPottenger]

I didn't use any spacers on mine.

 

[deadman19]

thanks guys for the help, used the measurements from the hurst/olds spoiler on another forum, pretty damn good, just touches the fenders.

 

[rob103255]

How tall did you make your spacers? I am going to be installing the same spoiler on mine soon .thanks for any help you can give me