getting dark need help quick

Status
Not open for further replies.

Cutty1

Master Mechanic
Nov 29, 2008
412
2
18
39
metro detroit
ok i just picked up a cherry picker a while ago after building the damn thing i'm trying to figure out why the damn motor isnt coming out... i have all 6 bolts in the back out, i unbolted the motor mounts 2 bolts that screws into motor it's self wheather then the whole mount and the motor lifts but it's stuck on the back it doesnt want to brake free, as if it wont budge from the 2 nipples on the back, starter took off i dk...? :wtf:
 
Did you unbolt the torque converter from the flexplate?
 
Did you unbolt the converter . 3 bolts through the fly wheel . good luck
 
ahhhhh sh*t no i didnt how do i get in there to do that?
 
Through the inspection cover of the trans...To your back again 😀
 
Gotta remove the torque converter cover and you either need two wrenches or just one. Some have bolts into nuts and some have bolts into holes, you'll see once your under there.
 
well all would be good if i had the right socket to turn the crank to get to the bolts calling it a nigght now
 
Stick a screw driver in on of the larger holes of the flexplate or in between the flexplate and torque converter and rotate it that way.
 
Harbor freight sells a flexplate holder for cheap that is a whole lot easier BUT in a bind screwdriver works good too.
 
Status
Not open for further replies.

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor