Header interference

[MY6.2SS]

I am using Holleys complete LS one swap kit for our g bodies.
Has anyone run into this before, driver side rear engine block mount bolt, touching header? Thanks, David

 

[565bbchevy]

Maybe replace it with a stainless buttonhead bolt if you just need a little more clearance.

 

[64nailhead]

Mc Hammer Hammer Time GIF - MC Hammer Hammer Time Cant Touch This - Discover & Share GIFs

Click to view the GIF

tenor.com

Agree with 565, a lower profile bolt head and I'd recommend a minor amount of massage therapy

 

[JAMCAR223]

That sucks, especially using a brand name kit. Looks to me, that header tube could have moved an 1/8" the other way. As stated, a button head may do it. If not, a countersunk bolt will. Either way, looks like you're unbolting headers to fix it.

 

[57 Handyman]

A good wack with a wood broom stick handle should result in sufficient clearance.

 

[Wraith]

At this point I assume everything is "cut to fit, paint to match" no matter what they say it "fits".

 

[mikester]

Maybe try a thicker gasket like a Remflex ? I tried to use them on my 406 and it pushed the right side header out to far. Hit the control arm. For you it might be enough

 

[Northernregal]

Get a couple more pics. A little farther out and one or two from underneath.

 

[melloelky]

A good wack with a wood broom stick handle should result in sufficient clearance.

did wonders on me growing up