headers

[Pro-Touring79Cutlass]

i put full length headers on my cutlass today, there from headmen .they went in fine but the passanger side is hitting the bracket that holds the lower control arm in place . the bracket that is welded on the frame .any sugestin .ive alredy dimpled the header tube

 

[beeterolds]

keep heating and dinging with a ball peen hammer... thats all u can do!

 

[busdriver]

This happens quite often when installing headers on a G- body. I'd remove some of the material off the lower control arm mount. I would only ding up the header as a last resort. Good Luck... 🙂