im building an 81 elco and im gunna be putting 28-11.5 hoosier QTP on it and was wondering how much this tire is going to raise my rear? also is anybody running a similair tire and lowered it? what springs did you use and if you have any pics. thanks, joe
lowering springs
- Thread starter 81elcamino
- Start date
- Status
> Luke, I have the 5409's matched with 5660's in my 442 and my GN, they
> compliment each other very well and do not really drop the car much at all,
> maybe a half inch. Rock Auto had the best prices on them.
I have the 5662s and the 5409s on my '88 Cutlass that I am redoing. The 5409s on
the back look just about right, however, the 5662s have raised the front more
than stock. And this is with a BBO under the hood. I have all the A/C stuff
re-installed and the hood on and it is still too high. I only need to put the
windshield in, but I don't think this is going to bring it down to where I want
it. I am tempted to just cut the 5662s, but they are REALLY stiff already. I
will probably sell the 5662s and buy a set of 5660s and cut them down a little.
moog part numbers this is from an older post
> compliment each other very well and do not really drop the car much at all,
> maybe a half inch. Rock Auto had the best prices on them.
I have the 5662s and the 5409s on my '88 Cutlass that I am redoing. The 5409s on
the back look just about right, however, the 5662s have raised the front more
than stock. And this is with a BBO under the hood. I have all the A/C stuff
re-installed and the hood on and it is still too high. I only need to put the
windshield in, but I don't think this is going to bring it down to where I want
it. I am tempted to just cut the 5662s, but they are REALLY stiff already. I
will probably sell the 5662s and buy a set of 5660s and cut them down a little.
moog part numbers this is from an older post
- Status
Similar threads
